Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Capacitive sensor CJ10-30GM-WS

CJ10-30GM-WS
  • 10 mm non-flush
  • The switching distance can be set over a wide range with the potentiometer

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  CJ10-30GM-WS

General specifications
Switching functionNormally open (NO)
Output typeTwo-wire
Rated operating distance10 mm
Installationnon-flush
Output polarityAC
Assured operating distance0 ... 7.2 mm
Output type2-wire
Nominal ratings
Installation conditions
A0 mm
B0 mm
C30 mm
F50 mm
Operating voltage20 ... 253 V AC 1)
Switching frequency0 ... 10 Hz
Hysteresis2 ... 10 typ. 5 %
Reverse polarity protectionreverse polarity tolerant
Voltage drop at IL
Voltage drop IL = 100 mA, switching element ontyp. 7 V
Momentary current
(20 ms, 0.1 Hz)
0 ... 1200 mA
Rated insulation voltage1500 V
Operating current5 ... 200 mA
Lowest operating current5 mA
Off-state current0.7 ... 1.5 mA typ.
Time delay before availability≤ 300 ms
Switching state indicatorLED, yellow
Indicators/operating means
Potentiometersensitivity adjustment
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross section0.75 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Degree of protectionIP67
Dimensions
Length80 mm
Diameter30 mm
Note1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V
Safety fuse ≤ 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.

Classifications

SystemClasscode
ECLASS 13.027274201
ECLASS 12.027274201
ECLASS 11.027270102
ECLASS 10.0.127270102
ECLASS 9.027270102
ECLASS 8.027270102
ECLASS 5.127270102
ETIM 9.0EC002715
ETIM 8.0EC002715
ETIM 7.0EC002715
ETIM 6.0EC002715
ETIM 5.0EC002715
UNSPSC 12.139121550

Details: CJ10-30GM-WS

Product Documentation: CJ10-30GM-WS

Language Selection:
Product informationKieliTiedostotyyppiTiedoston koko
Installation conditionsENGPDF219 KB

Design / Simulation: CJ10-30GM-WS

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP55 KB
CAD Portal / CAD PortalALLLINK---

Approvals: CJ10-30GM-WS

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
Canada USA UL Ordinary LocationUL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3ALLPDF1806 KB
China CQC CCC2024010305681595ALLPDF1035 KB

Liitännäistuotteet: CJ10-30GM-WS

Accessories

Mounting flange, 30 mmfa