Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
CBB8-18GS75-E2-V1
| General specifications |
| Switching function | Normally open (NO) |
| Output type | PNP |
| Rated operating distance | 1 ... 8 mm |
| Installation | flush |
| Output polarity | DC |
| Output type | 3-wire |
| Nominal ratings |
| Installation conditions | |
| A | 0 mm |
| B | 0 mm |
| C | 16 mm |
| F | 36 mm |
| Operating voltage | 10 ... 30 V |
| Switching frequency | 0 ... 100 Hz |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 1.5 V |
| Temperature drift | max. 20 % at -5 ... 55 °C (23 ... 131 °F) |
| Operating current | 0 ... 100 mA |
| No-load supply current | ≤ 18 mA |
| Time delay before availability | max. 300 ms |
| Functional safety related parameters |
| MTTFd | 343 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| LED green | Operating display |
| LED yellow | indication switching state |
| Potentiometer | sensitivity adjustment |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector plug M12 x 1 , 3-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PBT |
| Degree of protection | IP67 |
| Dimensions | |
| Length | 88 mm |
| Diameter | 18 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27274201 |
| ECLASS 12.0 | 27274201 |
| ECLASS 11.0 | 27270102 |
| ECLASS 10.0.1 | 27270102 |
| ECLASS 9.0 | 27270102 |
| ECLASS 8.0 | 27270102 |
| ECLASS 5.1 | 27270102 |
| ETIM 9.0 | EC002715 |
| ETIM 8.0 | EC002715 |
| ETIM 7.0 | EC002715 |
| ETIM 6.0 | EC002715 |
| ETIM 5.0 | EC002715 |
| UNSPSC 12.1 | 39121550 |
Details:
CBB8-18GS75-E2-V1
Product Documentation:
CBB8-18GS75-E2-V1
Design / Simulation:
CBB8-18GS75-E2-V1
Approvals:
CBB8-18GS75-E2-V1
Liitännäistuotteet:
CBB8-18GS75-E2-V1
| Accessories |
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
+358 20 7861 290