Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Sensor tester ST 04

ST 04
  • Two LEDs (NPN/PNP) for displaying the switching state
  • Test areas on the device: magnet, reflection, induction
  • Suitable for ultrasonic sensors
  • Usable for 2-, 3- and 4-wire sensors in NPN- and PNP-technique as well as with push-pull outputs
  • Easy connection due to quick-action clamp terminals
  • Optical and acoustical indication
  • Impact protection by means of removeable silicone sleeve

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ST 04

Tuotekuvaus
Sensor tester
Indicators/operating means
Control elementsmembrane keys :
ON / OFF
TEACH
LED greenoperating
LED yellowswitching state
Electrical specifications
Operating voltageinput voltage 4.5 V DC
input voltage 12 V DC with Power supply
output voltage 18 V DC
No-load supply current40 mA
Current loading capacitymax. 60 mA battery operated , 240 mA with Power supply
Conformity
Degree of protectionEN 60529
Ambient conditions
Ambient temperature-20 ... 40 °C (-4 ... 104 °F)
Mechanical specifications
Degree of protectionIP21
Connection4x quick-action clamp terminal
brown L+
black IN
white TEACH
blue L-
Material
Housingblack ABS
Protective sleevesilicone
Mass394 g
Dimensions
Height141 mm
Width82 mm
Depth34 mm
General information
Notesuitable for PNP , NPN and sensors with Push-pull (4 in 1) output
Scope of delivery1x Sensor tester , 1x silicone protective sleeve
Accessories
Optional accessoriesSensor connecting cables CBL-SET-ST 04
Power supply 12 V DC, barrel connector outer ∅ 3.5 mm, inner ∅ 1.5 mm
Necessary accessories3x battery size AA 1.5 V (not included with delivery)

Classifications

SystemClasscode
ECLASS 13.019200504
ECLASS 12.019200504
ECLASS 11.019200504
ECLASS 10.0.119200504
ECLASS 9.019200504
ECLASS 8.027279211
ECLASS 5.127279211
ETIM 9.0EC000305
ETIM 8.0EC000305
ETIM 7.0EC000305
ETIM 6.0EC000305
ETIM 5.0EC003015
UNSPSC 12.141113642

Details: ST 04

Function

The sensor tester is suitable for function testing of all 2-, 3- and 4-wire PNP and NPN DC sensors as well as with push-pull outputs.

Power is supplied to the sensor via quick-action clamp terminals. Sensors with two switch outputs are tested by connecting the signal lines successively to terminal [IN]. When the sensor output switches, this is displayed by a LED and indicated as well by a buzzing tone.

By means of the TEACH pushbutton sensors with a remote teach function can be tested. As long as TEACH is pushed terminal [T] supplies a voltage of 18 V.

Due to the high output load capacity ultrasonic sensors or similar devices can also be connected.

The automatic On/Off function prevents unnecessary use of energy and makes operation simple.

Approvals: ST 04

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F)TDOC-7698_FINFINPDF193 KB

Liitännäistuotteet: ST 04

Accessories
Cable set for sensor tester ST 04, PUR cable black, UL approved, drag chain suitable, torsion resistant, Suitable for drag chains and abrasion resistant, Suitable for robotic applications / torsion resistant, Degree of protection IP68 / IP69, Free of paint wetting interfering substances, Resistant to microbes and hydrolysisfa