Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
UCC4000-50GK-B26-V15-Y70169750
Tuotekuvaus |
Single head system |
General specifications |
Sensing range | 250 ... 4000 mm |
Dead band | 0 ... 250 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 75 kHz |
Electrical specifications |
Operating voltage | 2.5 ... 5 V DC
|
No-load supply current | ≤ 60 mA at 3.3 V DC |
Quiescent current indication | < 3 µA In standby mode |
Power consumption | ≤ 250 mW in the measurement operating mode |
Time delay before availability | ≤ 95 ms |
Interface 1 |
Interface type | Physical LIN interface |
Transfer rate | 19.2 kBit/s (8N1) |
Cycle time | 80 ms |
Resolution | 16 mm (corresponding to 1 LSB) |
Input |
Input type | Standby active |
Signal level | low: 0 ... 0.8 V |
Output |
Output type | PWM output (PNP) , not short-circuit protected |
Resolution | pulse length 10 µs /cm |
Output current | max. 10 mA |
Temperature influence | 3 % of full-scale value over the entire temperature range |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3 The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection. |
Approvals and certificates |
UL approval | UL Recognized , General purpose , Class 2 power source |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | Connector plug |
Degree of protection | IP67 |
Material | |
| Housing | PBT |
| Transducer | epoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated |
Connector | |
| Threading | M12 x 1 |
| Number of pins | 5 |
Mass | 115 g |
Dimensions | |
| Height | 54 mm |
| Width | 50 mm |
| Length | 50 mm |
Factory settings |
Default setting | Temperature compensation Address setting 7 |
Beam width | wide |
General information |
Scope of delivery | 2 nuts plastic |
Classifications
System | Classcode |
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Details:
UCC4000-50GK-B26-V15-Y70169750
Design / Simulation:
UCC4000-50GK-B26-V15-Y70169750
Approvals:
UCC4000-50GK-B26-V15-Y70169750