Ultrasonic sensor UMC3000-30H-I-5M-3G-3D
- ATEX-approval for zone 2 and zone 22
- Front of transducer and housing manufactured entirely from stainless steel
- Degree of protection IP68 / IP69K
- Programmable via DTM with PACTWARE
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot UMC3000-30H-I-5M-3G-3D
| Tuotekuvaus |
|---|
| Single head system |
| General specifications | ||
|---|---|---|
| Sensing range | 200 ... 3000 mm | |
| Adjustment range | 240 ... 3000 mm | |
| Dead band | 0 ... 200 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 100 kHz | |
| Response delay | ≤ 200 ms | |
| Indicators/operating means | ||
| LED green | Operating display | |
| LED yellow | object in evaluation range | |
| LED red | error | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | ≤ 50 mA | |
| Time delay before availability | ≤ 400 ms | |
| Input/Output | ||
| Input/output type | 1 synchronization connection, bidirectional | |
| 0 Level | 0 ... 1 V | |
| 1 Level | 4 V ... UB | |
| Input impedance | > 12 kΩ | |
| Output current | < 12 mA | |
| Pulse length | ≥ 200 µs | |
| Pulse interval | ≥ 2 ms | |
| Synchronization frequency | ||
| Common mode operation | ≤ 20 Hz | |
| Multiplex operation | ≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 ) | |
| Input | ||
| Input type | 1 program input | |
| Level (evaluation limit 1) | 0 ... 1 V | |
| Level (evaluation limit 2) | 3 V ... UB | |
| Input impedance | > 12 kΩ | |
| Pulse length | 2 ... 5 s | |
| Output | ||
| Output type | 1 analog output 4 ... 20 mA | |
| Resolution | Evaluation range [mm]/3200, however ≥ 0.4 mm | |
| Deviation of the characteristic curve | ≤ 0.2 % of full-scale value | |
| Repeat accuracy | ≤ 0.1 % of full-scale value | |
| Load impedance | ≤ 500 Ω at UB ≥ 14V ≤ 300 Ω at UB < 14V |
|
| Temperature influence | ≤ 1.5 % of full-scale value | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 |
|
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | cable PUR , 5 m | |
| Core cross section | 5 x 0.5 mm2 | |
| Degree of protection | IP68 / IP69K | |
| Material | ||
| Housing | Stainless steel 1.4404 / AISI 316L LED window: VMQ Elastosil LR 3003/Shore 50 A |
|
| Transducer | Stainless steel 1.4435 / AISI 316L | |
| Mass | 425 g | |
| Dimensions | ||
| Length | 100 mm | |
| Diameter | 30 mm | |
| Factory settings | ||
| Output | evaluation limit A1: 240 mm evaluation limit A2: 3000 mm output function: rising ramp |
|
| Equipment protection level Gc (nC) | ||
| Certificate | PF 17 CERT 3944 X | |
| ATEX marking |  II 3G Ex nC IIC T6 Gc X |
|
| Directive conformity | 2014/34/EU | |
| Standards | EN IEC 60079-0:2018 , EN 60079-15:2010 | |
| Equipment protection level Dc (tc) | ||
| Certificate | PF 17 CERT 3944 X | |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc X |
|
| Directive conformity | 2014/34/EU | |
| Standards | EN IEC 60079-0:2018 , EN 60079-31:2014 | |
| General information | ||
| Supplementary information | Switch settings of the external programming adapter: "output load": pull-down "output logic": noninv |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UMC3000-30H-I-5M-3G-3D
Function
The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used.
If the sensor is used in hazardous (classified) location, it will be necessary to follow the notes of the instruction manual.
Product Documentation: UMC3000-30H-I-5M-3G-3D
| Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 1323 KB | |
| Safety and Security Documentation | |||
| Käyttöohje | FIN | 131 KB | |
| Käyttöohje | FIN | 143 KB | |
Design / Simulation: UMC3000-30H-I-5M-3G-3D
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 67 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | ALL | EDZ | 63 KB |
Approvals: UMC3000-30H-I-5M-3G-3D
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| Europe Pepperl+Fuchs ATEX Category 3 D Certificate ATEX Category 3 G | PF17CERT3944X | ALL | 1543 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2592B | ALL | 52 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5453 | ALL | 44 KB | |
Software: UMC3000-30H-I-5M-3G-3D
| Device Description Files/Drivers | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| DTM for L2 and UMC3000 devices / DTM für Geräte der Serien L2 und UMC3000 | 1.3.0.0 / 30-07-2022 | ZIP | 5005 KB |
| Software Tools | |||
| PACTware 4.1 SP6 / PACTware 4.1 SP6 | 4.1.0.53 | ZIP | 43327 KB |
| PACTware 5.0 / PACTware 5.0 | 5.0.5.31 | ZIP | 44203 KB |
Liitännäistuotteet: UMC3000-30H-I-5M-3G-3D
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
| Accessories | ||||||
|
||||||
|
||||||
The USi-safety ultrasonic sensor system is breaking new ground for safety applications—whether in challenging, dusty environments or in outdoor areas.
Pepperl+Fuchs offers you various downloadable documents containing knowledge on ultrasonic sensors.
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.