Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
V19SX-G-ABG
| Tuotekuvaus |
| Male connector M12 straight X-coded 8-pin, Cat6A, shielded, for cable diameter 5.5 - 9 mm, field-attachable, insulation displacement connection |
| General specifications |
| Connector 1 | |
| Connection | plug |
| Construction type | M12 |
| Style | straight |
| Locking | screw connection |
| Number of pins | 8 |
| Coding | X-coded |
| Electrical specifications |
| Operating voltage | max. 50 V AC / 60 V DC |
| Operating current | max. 0.5 A |
| Volume resistance | max. 15 mΩ |
| Contact resistance | max. 5 MΩ |
| Insulation resistance | min. 100 MΩ |
| Conformity |
| Degree of protection | EN 60529 |
| Fieldbus standard | IEEE 802.3an 10GBASE-T |
| Transmission technology | suitable for PoE+ Power over Ethernet IEEE 802.3at |
| Plug connection | connector M12 x 1 : IEC 61076-2-109 |
| Component category | CAT6A (IEC 11801, EN 50173) |
| Ambient conditions |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Pollution degree | 3 |
| Mechanical specifications |
| Plug connector | |
| Tightening torque | 0.6 Nm |
| Loosening protection | available |
| Tool installation | straight knurling , hexagon nut SW = 18 mm |
| Mating cycles | min. 100 |
| Shielding | via Body |
| Degree of protection | IP67 |
| Connection | Wire manager included with delivery |
| Cable | |
| Sheath diameter | 5,5 ... 9 mm |
| Core cross section | solid: 0.25 ... 0.34 mm2 (24 ... 22/1 AWG)
stranded: 0.10 ... 0.34 mm2 (27 ... 22/7 AWG) |
| Mass | 76 g |
| Material |
| Plug connector | |
| Screw connection | Zinc diecast, nickel-plated |
| Body | Zinc diecast, nickel-plated / brass, nickel-plated |
| Seal | NBR |
| Contact surface | Au / Ni |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27440116 |
| ECLASS 12.0 | 27440116 |
| ECLASS 11.0 | 27440102 |
| ECLASS 10.0.1 | 27440102 |
| ECLASS 9.0 | 27440102 |
| ECLASS 8.0 | 27440104 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC002635 |
| ETIM 8.0 | EC002635 |
| ETIM 7.0 | EC002635 |
| ETIM 6.0 | EC002635 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details:
V19SX-G-ABG
Product Documentation:
V19SX-G-ABG
Design / Simulation:
V19SX-G-ABG
Liitännäistuotteet:
V19SX-G-ABG
| Accessory of |
|
|
|
| The 3-D time-of-flight sensor is based on the principle of measuring time-of-flight of infrared light. This allows raw 3-D data from objects at a range of 400 to 7500 mm to be acquired with an image resolution of 0.3 MP and a frame rate of 30 fps. The sensor features a Gigabit Ethernet interface, intuitive operating software, rugged metal housing, and an API interface. The sensor is especially suitable for dynamic applications with a larger measuring range.fa |
|
|
|
|
| The sensor uses stereo-vision technology and structured light to capture objects in 3-D. It can acquire raw 3-D data at a range of 300 to 900 mm with an image resolution of 1.4 MP and a frame rate of 10 fps. The sensor features a Gigabit Ethernet interface, intuitive operating software, rugged metal housing, and an API interface. As a raw data sensor, it is suitable for a variety of applications that require detailed contour detection.fa |
|
+358 20 7861 290