HART Termination Board FI-PFH-TR-AI-370X-GP

System board for Schneider Electric, Tricon series by Triconex
TAN48 approval
HART Termination Board (ETP) for Tricon v10 AI module
For 16-channel AI cards 3700, 3700A, 3703E and 3721
16-channel
Field side: pluggable screw terminals, green
Control side: ELCO socket, 56-pin

Technical Data
Details
Product Documentation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot FI-PFH-TR-AI-370X-GP

Supply
Rated voltage		20.4 ... 27.6 V DC SELV/PELV
Voltage drop		0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple		max. 10 %
Fusing		1 A
Power dissipation		≤ 500 mW
Reverse polarity protection		yes
Interface
Type		multiplexer connection : IDC plug, 26-pin
Redundancy
Supply		Redundancy available. The supply is decoupled, monitored and fused.
Signal lines
Rated current		max. 30 mA per channel
Indicators/settings
Display elements		- LED PS-A (Termination Board power supply), green LED - LED PS-B (Termination Board power supply), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 For further information see system description.
Degree of protection		IEC 60529:2001
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Storage temperature		-15 ... 50 °C (5 ... 122 °F)
Relative humidity		≤ 93 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Mechanical specifications
Degree of protection		IP20
Connection
	Field side	pluggable screw terminals , green
	Control side	ELCO socket, 56-pin HART : 1 x IDC plug, 26-pin
	Supply	screw terminals , green
Core cross section		0.5 ... 2.5 mm² (20 ... 12 AWG)
Material
	Housing	PVC
Mass		approx. 415 g
Dimensions		126 x 123 x 59 mm (5.0 x 4.9 x 2.3 inch) (W x H x D)
	Height	123 mm
	Width	126 mm
	Depth	59 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		PF 11 CERT 1931 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210120
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121008

Details: FI-PFH-TR-AI-370X-GP

Function

The function of the HART Termination Board as well as the connector pin assignment exactly fit the requirement of Triconex systems.

The HART termination board has pluggable screw terminals to connect HART field devices.

The 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board.

The design permits the fast and reliable installation in the system cabinet.

Product Documentation: FI-PFH-TR-AI-370X-GP

Manuals	Kieli	Tiedostotyyppi	Tiedoston koko
Manual KFD-HM-16	ENG	PDF	8323 KB

Approvals: FI-PFH-TR-AI-370X-GP

Certificates	Sertifikaatin nro	Kieli	Tiedostotyyppi	Tiedoston koko
Europe Pepperl+Fuchs ATEX Category 3 G Certificate of Compliance	PF11CERT1931 X	ALL	PDF	197 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-1070D	ALL	PDF	107 KB

Liitännäistuotteet: FI-PFH-TR-AI-370X-GP

Matching System Components

	KFD0-HMS-16 HART MUX Secondary Module
	16-channel, No external power required, HART field device input (revision 5 to 7), Used with HART MUX primary module KFD2-HMM-16, Up to SIL 3 acc. to IEC/EN 61508pa

	KFD2-HMM-16 HART MUX Primary Module
	16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected, Up to SIL 3 acc. to IEC/EN 61508pa

Accessories

	K-HM26-114025 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	K-HM14 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16, 14-pin ribbon cablepa

	K-HM26 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

General Notes Relating to Pepperl+Fuchs Product Information

Pikalinkit

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.