Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Search characteristics | ||
---|---|---|
Additional functions | ||
Asymmetrical version | yes | |
General specifications | ||
Type | DC version, positive polarity | |
Electrical specifications | ||
Nominal resistance | terminals 1, 8: 240 Ω; terminals 4, 5: 50 Ω | |
Series resistance | terminals 1, 8: max. 250 Ω terminals 4, 5: max. 64 Ω |
|
Fuse rating | 80 mA | |
Hazardous area connection | ||
Connection | terminals 1, 2; 3, 4 | |
Safe area connection | ||
Connection | terminals 5, 6; 7, 8 | |
Working voltage | ||
Supply loop | terminals 7, 8: max. 27 V terminals 5, 6: max. 8.6 V |
|
Measurement loop | terminals 7, 8: max. 26.5 V at 10 µA terminals 5, 6: max. 6.5 V at 10 µA |
|
Conformity | ||
Degree of protection | IEC 60529 | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Relative humidity | max. 75 % , without condensation | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Connection | screw terminals | |
Core cross section | max. 2 x 2.5 ... mm2 | |
Mass | approx. 150 g | |
Dimensions | 12.5 x 115 x 116 mm (0.5 x 4.5 x 4.6 inch) (W x H x D) | |
Height | 115 mm | |
Width | 12.5 mm | |
Depth | 116 mm | |
Construction type | modular terminal housing , see system description | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | BAS 01 ATEX 7005 | |
Marking | ![]() |
|
Voltage | terminals 1, 2: 28 V; terminals 3, 4: 9.56 V | |
Current | terminals 1, 2: 120 mA; terminals 3, 4: 195 mA | |
Power | terminals 1, 2: 830 mW; terminals 3, 4: 470 mW | |
Supply | ||
Maximum safe voltage | 250 V | |
Series resistance | terminals 1, 2: min. 235 Ω; terminals 3, 4: min. 49 Ω | |
Certificate | TÜV 99 ATEX 1484 X | |
Marking | ![]() |
|
Directive conformity | ||
Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 | |
International approvals | ||
FM approval | ||
Control drawing | 116-0118 | |
UL approval | ||
Control drawing | 116-0139 (cULus) | |
IECEx approval | ||
IECEx certificate | IECEx BAS 09.0142 IECEx BAS 17.0091X |
|
IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
|
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27211016 |
ECLASS 12.0 | 27211016 |
ECLASS 11.0 | 27211016 |
ECLASS 10.0.1 | 27219001 |
ECLASS 9.0 | 27219001 |
ECLASS 8.0 | 27219001 |
ECLASS 5.1 | 27210702 |
ETIM 9.0 | EC001485 |
ETIM 8.0 | EC001485 |
ETIM 7.0 | EC001485 |
ETIM 6.0 | EC001485 |
ETIM 5.0 | EC002653 |
UNSPSC 12.1 | 39121018 |
The Zener Barrier prevents the transfer of unacceptably high energy from the safe area into the hazardous area.
The zener diodes in the Zener Barrier are connected in the reverse direction. The breakdown voltage of the diodes is not exceeded in normal operation. If this voltage is exceeded, due to a fault in the safe area, the diodes start to conduct, causing the fuse to blow. The Zener Barrier has a positive polarity, i. e. the anodes of the zener diodes are grounded.
This high power version has a smaller serial resistance and therefore provides higher voltage to the field device.
Asymmetrical Zener Barriers are for optimization of applications which have different voltage levels regarding to ground potential.
Depending on the application, increased or decreased intrinsic safety parameters apply for serial or parallel connection. For the detailed parameters refer to the Zener Barrier certificate. Application examples can be found in the system description of the Zener Barriers.
Safety and Security Documentation | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Käyttöohje | FIN | 223 KB | |
Functional Safety Manual | ENG | 1972 KB | |
Manuals | |||
System Manual | ENG | 1203 KB |
CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 951 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
EPLAN macros Z-System devices (EMA) / EPLAN-Makros Geräte Z-System (EMA) | ALL | ZIP | 2338 KB |
Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|---|
Baseefa IECEx Certificate of Conformity | IECEx BAS 17.0091X | ALL | LINK | --- |
Baseefa IECEx Certificate of Conformity | IECEx BAS 09.0142 | ALL | LINK | --- |
Brasil TUV Rheinland Brazil | TÜV 14.0362 | ALL | 1465 KB | |
China SITIIAS CCC Ex Certificate | 2020322316002775 (Bintan) | ALL | 21091 KB | |
DNV Marine | TAA00001WX | ALL | 106 KB | |
Europe Baseefa Group I (M1) ATEX Category (1) GD | BAS 01 ATEX 7005 | ALL | 8525 KB | |
Europe TUV Nord II 3 G ATEX Category 3 G | TÜV 99 ATEX 1484X | ALL | 1460 KB | |
India PESO (India) CCOE | A/P/HQ/KA/104/6091 (P576843) | ALL | 105 KB | |
Korea KOSHA | 09-AV4BO-0228/0229/0230 | ALL | 717 KB | |
Korea KOSHA | 14-AV4BO-0610 | ALL | 285 KB | |
SIMTARS IECEx Certificate of Conformity | IECEx SIM 06.0012X | ALL | LINK | --- |
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378 | CoC 20190321 - E106378 RepRef 19960425 | ALL | 252 KB | |
USA FM | FM 17 US 0370 | ALL | 416 KB | |
USA UL | E106378 UL (QUZW) | ALL | LINK | --- |
Worldwide Pepperl+Fuchs Functional Safety Assessment | CERT-5207 | ALL | 575 KB | |
Control Drawings | ||||
Control drawing UL / Control drawing UL | ALL | 170 KB | ||
Control drawing FM / Control drawing FM | ALL | 167 KB | ||
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) | TDOC-0060EFIN | FIN | 194 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-5844 | ALL | 98 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|