Timer, Counter KC-LCD-48-1R-230VAC
- Counter/Timer
- Adding/subtracting via 2 separate inputs
- Batch controller with 1 pre-selection
- Easy-to-read, 2-line LCD display with symbols for indicated pre-selection and output status
- Display range and preselection range from -999999 up to 999999
Overflow will be evaluated correctly up to 1 decade - PNP and NPN sensors can be connected
- Degree of protection IP65 (front only)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot KC-LCD-48-1R-230VAC
| Tuotekuvaus |
|---|
| LCD batch controller with 1 relay output and 230 VAC supply voltage |
| General specifications | ||
|---|---|---|
| Pre-selection | single | |
| Data storage | > 10 years, EEPROM | |
| Programming | keypad-driven menu | |
| Indicators/operating means | ||
| Type | 2-line, 2 x 6-digit LC display with leading sign | |
| Display value | digit height 9 mm | |
| Pre-selection | digit height 7 mm | |
| Key interlock | via "high" potential at "LOCK" input | |
| Decimal point | 0 to max 5 fractional digits | |
| Scale factor | 0.0001 ... 99.9999 | |
| Reset | manually or external | |
| Electrical specifications | ||
| Fusing | T 0.1 A | |
| Operating voltage | 230 V AC | |
| Power consumption | max. 6.5 VA | |
| Input | ||
| Connection | Counter inputs: A and B Control/reset inputs: LOCK, RESET |
|
| Signal voltage | ||
| High | 3.5 ... 30 V DC | |
| Low | 0 ... 2 V DC | |
| Counting frequency | 30 Hz / 5 kHz | |
| Minimum pulse duration | Control/reset inputs: static / 1 ms | |
| Impedance | 10 kOhm | |
| Count modes | ||
| Pulse counter | Counting with counting direction (cnt.dir), difference counting (up.dn), up/down counting (quad), |
|
| Timer | Time measurement via GATE input (FrErun), counter input A: Start, counter input B: Stop (InpA.InpB.), counter input B: Start/Stop (InpB.InpB.), |
|
| Output | ||
| Relay | changeover contact | |
| Switching voltage | max. 250 V AC / 110 V DC | |
| Switching current | max. 3 A AC/DC, min. 30 mA DC, | |
| Switching power | max. 750 VA / 90 W | |
| Mechanical life | 2 x 107 switching cycles | |
| Electrical life | 5 x 104 cycles at 3 A | |
| Response time | < 15 ms pulse counter < 10 ms time counter |
|
| Sensor supply | 14.4 ... 27.6 V DC max. 50 mA at 230 VAC |
|
| Compliance with standards and directives | ||
| Directive conformity | ||
| Low Voltage Directive 2006/95/EC | EN 61010-1:2001; protection class: 2 | |
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 50295:1999 | |
| Standard conformity | ||
| Emitted interference | DIN EN 55011:2009, Class B | |
| Mech. capacity | EN 60068-2-6:2008 10 … 55 Hz / 1 mm / XYZ 30 min in each direction |
|
| Shock and impact resistance | EN 60068-2-27:1995 100 G / 2 ms / XYZ 3 times in each direction |
|
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -25 ... 75 °C (-13 ... 167 °F) | |
| Relative humidity | ≤ 93 % at 40 °C (noncondensing) |
|
| Altitude | 0 ... 2000 m | |
| Pollution degree | 2 | |
| Mechanical specifications | ||
| Degree of protection | IP65 (front) | |
| Mass | approx. 230 g | |
| Dimensions | 48 mm x 48 mm x 109.8 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210301 |
| ECLASS 12.0 | 27210301 |
| ECLASS 11.0 | 27210301 |
| ECLASS 10.0.1 | 27210301 |
| ECLASS 9.0 | 27210301 |
| ECLASS 8.0 | 27210301 |
| ECLASS 5.1 | 27210301 |
| ETIM 9.0 | EC002300 |
| ETIM 8.0 | EC002300 |
| ETIM 7.0 | EC002300 |
| ETIM 6.0 | EC002300 |
| ETIM 5.0 | EC000677 |
| UNSPSC 12.1 | 41111902 |
Details: KC-LCD-48-1R-230VAC
Product Documentation: KC-LCD-48-1R-230VAC
| Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Operating Instructions KC-LCD-48-1R-* / Bedienungsanleitung KC-LCD-48-1R-* | ALL | 2263 KB |
Approvals: KC-LCD-48-1R-230VAC
| Declaration of Conformity | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2895B | ALL | 110 KB |
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.