Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
V1S-G-ABG-PG9
| Tuotekuvaus |
| Male connector M12 straight A-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachable |
| General specifications |
| Connector 1 | |
| Connection | plug |
| Construction type | M12 |
| Style | straight |
| Locking | screw connection |
| Number of pins | 4 |
| Coding | A-coded |
| UL File Number | E363587 |
| Electrical specifications |
| Operating voltage | max. 250 V AC/DC |
| Operating current | max. 4 A |
| Insulation resistance | min. 100 MΩ |
| Conformity |
| Degree of protection | EN 60529 |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 |
| Ambient conditions |
| Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Pollution degree | 3 |
| Mechanical specifications |
| Plug connector | |
| Tightening torque | 0.6 Nm |
| Tool installation | straight knurling , hexagon nut SW = 18 mm |
| Mating cycles | min. 100 |
| Shielding | iris spring shielding |
| Degree of protection | IP67 |
| Connection | screw terminals for max. 0.75 mm2 / AWG 18 |
| Cable | |
| Sheath diameter | 5 ... 8 mm |
| Mass | 45.83 g |
| Material |
| Plug connector | |
| Screw connection | Zinc diecast, nickel-plated |
| Body | Zinc diecast, nickel-plated |
| Seal | NBR |
| Contact surface | Au |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27440116 |
| ECLASS 12.0 | 27440116 |
| ECLASS 11.0 | 27440102 |
| ECLASS 10.0.1 | 27440102 |
| ECLASS 9.0 | 27440102 |
| ECLASS 8.0 | 27440104 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC002635 |
| ETIM 8.0 | EC002635 |
| ETIM 7.0 | EC002635 |
| ETIM 6.0 | EC002635 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details:
V1S-G-ABG-PG9
Product Documentation:
V1S-G-ABG-PG9
Design / Simulation:
V1S-G-ABG-PG9
Liitännäistuotteet:
V1S-G-ABG-PG9
| Accessory of |
|
|
|
| IDENTControl Compact RFID evaluation unit with EtherCAT interfacefa |
|
|
|
|
| IDENTControl Compact control interface with CC-Link V2 interfacefa |
|
|
|
|
| Cable, PUR/PP, 4-core grey, shieldedfa |
|
|
|
|
|
| Cable, PUR/PP, 4-core grey, shieldedfa |
|
|
|
|
| Cable, PUR/PP, 4-core black, shielded, UL approved, drag chain suitable, outdoorfa |
|
|
|
|
|
| Cable, PUR/PP, 4-core black, shielded, UL approved, drag chain suitablefa |
|
|
|
|
| Cable, PUR/PP, 4-core twisted quad violet, shielded, UL approved, drag chain suitable, salt water resistantfa |
|
|
|
|
|
| Cable, PUR/PP, 4-core twisted pairs black, shielded, UL approved, drag chain suitable, outdoorfa |
|
|
|
|
| LF RFID read/write device for IDENTControl, for hazardous areasfa |
|
|
|
|
|
| HF RFID read/write device for hazardous areas, ISO 15693, for IDENTControlfa |
|
+358 20 7861 290