Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
CBL-SET-ST 04
| Tuotekuvaus |
| Cable set for sensor tester ST 04, PUR cable black, UL approved, drag chain suitable, torsion resistant |
| General specifications |
| Customization | core ends sheath stripped , with wire end ferrule |
| Electrical specifications |
| Operating voltage | M12 max. 250 V AC/DC
M8 4-pin max. 30 V AC/DC
M8 3-pin max. 48 V AC / 60 V DC |
| Operating current | max. 4 A |
| Conformity |
| Degree of protection | EN 60529 |
| Approvals and certificates |
| UL approval | AWM STYLE 20549 AWM I/II A/B 80°C 300V FT2 (cable) |
| Ambient conditions |
| Pollution degree | 3 |
| Mechanical specifications |
| Cable | according to IEC/EN 60228 (DIN VDE 0295) class 6 |
| Sheath diameter | 4.3 mm |
| Bending radius | > 10 x cable diameter, movable installation
> 5 x cable diameter, fixed installation |
| Number of cores | 4 |
| Core cross section | 0.34 mm2 |
| Length | 0.2 m |
| Drag chain suitability | |
| Drag chain cycles | min. 5000000 |
| Motion velocity | max. 3.3 m/s |
| Traverse distance | max. 5 m |
| Acceleration | max. 5 m/s2 |
| Torsion cycles | min. 1000000 |
| Torsional stress | ± 180 °/m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27279090 |
| ECLASS 12.0 | 27279090 |
| ECLASS 11.0 | 27279090 |
| ECLASS 10.0.1 | 27279090 |
| ECLASS 9.0 | 27279090 |
| ECLASS 8.0 | 27279090 |
| ECLASS 5.1 | 27279290 |
| ETIM 9.0 | EC003015 |
| ETIM 8.0 | EC003015 |
| ETIM 7.0 | EC003015 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 31251501 |
Details:
CBL-SET-ST 04
Liitännäistuotteet:
CBL-SET-ST 04
| Accessory of |
|
|
|
| Sensor tester, Two LEDs (NPN/PNP) for displaying the switching state, Test areas on the device: magnet, reflection, induction, Suitable for ultrasonic sensors, Usable for 2-, 3- and 4-wire sensors in NPN- and PNP-technique as well as with push-pull outputs, Easy connection due to quick-action clamp terminalsfa |
|
| Accessories |
|
|
|
| torque screwdriver (0.6 Nm)fa |
|
|
|
|
| plug-in cap M12fa |
|
|
|
|
| Label holder, Halogen-freefa |
|
|
|
|
| Label plate, Halogen-freefa |
|
|
|
|
| Modular universal holder for M12 connectorsfa |
|
|
|
|
| Unlocking protector for M12 connector, Prevents connections being interrupted without using a toolfa |
|
|
|
|
| Marking rings for M12 connectors, various colorsfa |
|
+358 20 7861 290