Power Supply PS1000-A6-12.16

100 V AC to 240 V AC wide-range input
Output 12 V DC, 16 A, 192 W, 1-phase
Housing width 39 mm
Efficiency up to 94.3 %
Minimal inrush current surge
Remote control for ON/OFF
DC OK relay contact
Suitable for Zone 2/Div. 2 mounting

Technical Data
Details
Informative Literature
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot PS1000-A6-12.16

Electrical specifications
Efficiency		92.8 % at 120 V AC 94.3 % at 230 V AC
Power dissipation		14.9 W at 120 V AC 11.6 W at 230 V AC
Input
Voltage range		100 ... 240 V AC (-15 %/+10 %), 50 ... 60 Hz (±6 %) 110 ... 150 V DC (±20 %)
Current		1.74 A at 120 V AC 0.92 A at 230 V AC 1.9 A at 110 V DC for lower output currents see technical information
Inrush current		6 A peak at 120 V AC and ambient temperature 40 °C (104 °F) 9 A peak at 230 V AC and ambient temperature 40 °C (104 °F)
Capacity factor		0.99 at 120 V AC 0.96 at 230 V AC
Remote control		terminals 15-, 16+ remote control for ON/OFF
Output
Rated voltage		12 V DC
Voltage range		12 ... 15 V DC factory setting: 12 V
Rated current		16 A
Current		19.2 ... 15.4 A at ambient temperature < 45 °C (113 °F) 16 ... 12.8 A at ambient temperature 60 °C (140 °F) 12 ... 9.6 A at ambient temperature 70 °C (158 °F) linear power derating see technical information
Power		192 W
Ripple		max. 50 mV _pp
Hold-up time		50 ms at 120 V AC 50 ms at 230 V AC
Overload behavior		continuous current : output voltage > 6.5 V DC intermittent current : output voltage < 6.5 V DC
Short-circuit current		typ. 55 A for up to 12 ms, load impedance < 30 mΩ
Voltage limitation		typ. 18.2 V DC max. 19 V DC
Fault indication output
Connection		terminals 13, 14
Output type		relay contact DC OK - contact is closed if the output voltage is > 90 % of the adjusted output voltage
Contact loading		max. 60 V DC/0.3 A ; 30 V DC/1 A ; 30 V AC/0.5 A resistive load min. 1 mA at 5 V DC
Galvanic isolation
Input/Output		SELV/PELV
Indicators/settings
Display elements		LED green: status DC OK - LED lights up if the output voltage is > 90 % of the adjusted output voltage
Control elements		potentiometer
Configuration		setting of the output voltage via potentiometer
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	IEC/EN 61000-6-1 , IEC/EN 61000-6-2 , IEC/EN 61000-6-3 , IEC/EN 61000-6-4 , IEC/EN 61000-3-2 , IEC/EN 61000-3-3
Low voltage
	Directive 2014/35/EU	EN 61010-1
RoHS
	Directive 2011/65/EU (RoHS)	IEC/EN 63000:2019
Conformity
Degree of protection		EN 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F) , see technical information
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		5 ... 95 %, noncondensing
Shock resistance		20 g , 11 ms or 30 g , 6 ms
Vibration resistance		2 ... 17.8 Hz : ± 1.6 mm , 17.8 ... 500 Hz : 2 g
Mechanical specifications
Housing material		aluminum alloy , galvanized steel
Degree of protection		IP20
Connection
	Input/Output	screw terminals conductor cross section: max. 6 mm² (AWG 20-10) cable diameter: max. 2.8 mm, wire end ferrules included stripped insulation length: 7 mm tightening torque: max. 1 Nm
	Relay contact output	spring terminals conductor cross section: max. 1.5 mm² (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm
	Remote control	spring terminals conductor cross section: max. 1.5 mm² (AWG 24-16) cable diameter: max. 1.6 mm, wire end ferrules included stripped insulation length: 7 mm
Mass		approx. 600 g
Dimensions		39 x 124 x 117 mm (W x H x D) , without DIN mounting rail
	Height	124 mm
	Width	39 mm
	Depth	117 mm
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
ATEX approval
	ATEX certificate	EPS 15 ATEX 1101 X
	ATEX marking	II 3G Ex ec nC II T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015+A1:2018 , EN 60079-15:2010
International approvals
UL approval		E223176
IECEx approval
	IECEx certificate	IECEx EPS 20.0055X
	IECEx marking	Ex ec nC IIC T4 Gc
	Standards	IEC 60079-0:2017 , IEC 60079-7:2017 , IEC 60079-15:2017
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27040790
ECLASS 12.0	27040790
ECLASS 11.0	27040790
ECLASS 10.0.1	27040790
ECLASS 9.0	27040790
ECLASS 8.0	27049090
ECLASS 5.1	27049090
ETIM 9.0	EC002542
ETIM 8.0	EC002542
ETIM 7.0	EC002542
ETIM 6.0	EC002542
ETIM 5.0	EC002542
UNSPSC 12.1	39121004

Details: PS1000-A6-12.16

Function

The device is used to supply field devices with 12 V DC and 16 A.

The device has a power reserve of 20 % included, which may even be used continuously at temperatures up to +45 °C.

The output voltage can be adjusted via a potentiometer. The device status is indicated by an LED.

The device has a relay contact output for remote monitoring.

The device has a connection for switching off the device via a remote control.

The device is mounted on a 35 mm DIN mounting rail according to EN 60715.

Informative Literature: PS1000-A6-12.16

Literature	Kieli	Tiedostotyyppi	Tiedoston koko
Product Information - PS1000 for Global Use up to Zone 2/Div. 2	ENG	PDF	577 KB

Product Documentation: PS1000-A6-12.16

Product information	Kieli	Tiedostotyyppi	Tiedoston koko
Technical information	ENG	PDF	3044 KB
Safety and Security Documentation
Instruction manual / Betriebsanleitung	ALL	PDF	243 KB
Instruction manual / Betriebsanleitung	ALL	PDF	307 KB

Design / Simulation: PS1000-A6-12.16

CAD	Kieli	Tiedostotyyppi	Tiedoston koko
CAD 3-D / CAD 3-D	ALL	STP	6575 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	195 KB

Approvals: PS1000-A6-12.16

Certificates	Sertifikaatin nro	Kieli	Tiedostotyyppi	Tiedoston koko
Bureau Veritas IECEx Certificate of Conformity	IECEx EPS 20.0055X	ALL	LINK	---
China SITIIAS CCC Ex Certificate	2023122303116292 (Mannheim)	ALL	PDF	529 KB
DNV GL Marine	TAA0000316	ALL	PDF	179 KB
Europe Bureau Veritas ATEX Category 3 G	EPS 15 ATEX 1 101 X	ALL	PDF	1071 KB
US CA UL	CoC E223176 RptRef E223176-20070416	ALL	PDF	444 KB
USA CSA Hazardous Location	CoC 80059966	ALL	PDF	68 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4785	ALL	PDF	73 KB
EU Declaration of Conformity (P+F)	TDOC-4785AFIN	FIN	PDF	182 KB

Liitännäistuotteet: PS1000-A6-12.16

Accessories

	PS1000-D2-24.40.RM Redundancy Module
	12 V DC to 28 V DC input, 2 inputs with 1 output, Output 24 V DC, 40 A, Housing width 36 mm, Built-in decoupling mosfets for 1+1 and N+1 redundancy, Only 72 mV voltage drop at 20 A output current, Only 1.7 W loss at 2 x 10 A and 5.9 W at 2 x 20 A input current, Reverse input polarity protection, Suitable for Zone 2/Div. 2 mounting, Device type: device for DIN rail mounting, Function: Redundancy Module, Voltage range: 12 ... 28 V DCpa

General Notes Relating to Pepperl+Fuchs Product Information

Pikalinkit

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.