High temperature identification system OIT500-F113-B12-CB
- High-temperature code carrier up to 500 °C (932 °F)
- Sturdy and compact design
- Integrated illumination
- High operating range
- Large sensing range
- High depth of focus
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot OIT500-F113-B12-CB
| Tuotekuvaus |
|---|
| Optical high temperature identification system, 200 to 450 mm |
| General specifications | ||
|---|---|---|
| Light source | Integrated LED lightning | |
| Light type | infrared | |
| Symbologies | Hole matrix Data format: decimal Data capacity: 6 (numerical) Orientation: omnidirectional |
|
| Read distance | 200 ... 450 mm | |
| Depth of focus | ± 50 mm | |
| Reading field | 330 mm x 250 mm at max. read distance | |
| Evaluation frequency | 5 Hz | |
| Target velocity | triggered max. 0.5 m/s | |
| Functional safety related parameters | ||
| MTTFd | 51 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: supply LED green: ready |
|
| Function indicator | Yellow LED: trigger Yellow LED: code read Red LED: pre-fault Red LED: group error |
|
| Electrical specifications | ||
| Operating voltage | 24 V DC ± 15% , PELV | |
| Operating current | 250 mA without output drivers | |
| Interface | ||
| Physical | Ethernet | |
| Protocol | TCP/IP | |
| Transfer rate | 100 MBit/s | |
| Input | ||
| Input voltage | to be applied externally 24 V ± 15% PELV | |
| Number/Type | 1 trigger input 2 control unit inputs , optically decoupled | |
| Input current | approx. 1 mA at 24 V DC | |
| Output | ||
| Number/Type | 1 electronic output, PNP, optically decoupled | |
| Switching voltage | to be applied externally 24 V ± 15 % PELV | |
| Switching current | 100 mA each output | |
| Conformity | ||
| Shock resistance | EN 60068-2-27:2009 | |
| Vibration resistance | EN 60068-2-6:2008 | |
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61326-1:2013 | |
| Photobiological safety | EN 62471:2008 exempt group | |
| Approvals and certificates | ||
| CE conformity | CE | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP64 | |
| Connection | 8-pin Harting HAN RJ-45 2 x 5-pin M12 socket Supplied ferrite sleeve for suppression of the Ethernet cable |
|
| Material | ||
| Housing | diecast aluminum powder coated | |
| Mass | approx. 4000 g | |
| Dimensions | ||
| Height | 101 mm | |
| Width | 261 mm | |
| Depth | 171 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280103 |
| ECLASS 12.0 | 27280103 |
| ECLASS 11.0 | 27280103 |
| ECLASS 10.0.1 | 27280103 |
| ECLASS 9.0 | 27280103 |
| ECLASS 8.0 | 27280103 |
| ECLASS 5.1 | 27280103 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
Details: OIT500-F113-B12-CB
Function
The OIT500-* stationary read device is an optical identification system that works using industrial vision methods and is used in automated manufacturing processes. The ambient conditions in automobile construction in particular, for example the cyclical temperature changes, often make the use of read-only tags with electronic components difficult if not impossible. For the OIT high-temperature identification system, read-only tags of solid metal plates with a perforated matrix are used, which are designed for use at temperatures of up to 500 °C and suitable for high mechanical stress.
Simple installation and commissioning without complicated, time-consuming Teach-In processes enable rapid entry. Pluggable connections for the rapid exchange of devices and a controller with simple command set via the Ethernet interface guarantee simple operation. A scratch-resistant, replaceable quartz glass panel and sturdy metal housing make the OIT500-* a robust, efficient identification system.
Informative Literature: OIT500-F113-B12-CB
| Literature | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Application Report - Reliable Optical Identication in High-Temperature Environments | ENG | 218 KB |
Product Documentation: OIT500-F113-B12-CB
| Product information | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| EtherNet/IP: OIT500 used with RTS-UP... | ENG | 640 KB | |
| Reading window and permissible displacement of read-only tags | ENG | 116 KB | |
| SIMATIC S7 Demo FB for EASY Mode Operation | ENG | 169 KB | |
| Brief Instructions | |||
| Instruction leaflet / Beipackzettel | ALL | 483 KB | |
| Manuals | |||
| Manual OIT****-F113-B12-CB* | ENG | 5550 KB | |
Design / Simulation: OIT500-F113-B12-CB
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1608 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: OIT500-F113-B12-CB
| Declaration of Conformity | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2494D | ALL | 34 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6625 | ALL | 30 KB |
Software: OIT500-F113-B12-CB
| Software Tools | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Software OITControl for configuration and start of operation / Software OITControl zur Konfiguration und Inbetriebnahme | V2.5.0 | ZIP | 12282 KB |
Liitännäistuotteet: OIT500-F113-B12-CB
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.