Inductive positioning system PMI120-F90-IU2EP-IO-V15-3G-3D

Parameterization and diagnosis via IO-Link
Measuring range 0 ... 120 mm
Parameterisable measuring range
Analog current or voltage output, programmable
2 Push-pull outputs
Switch points programmable via IO-Link

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot PMI120-F90-IU2EP-IO-V15-3G-3D

General specifications
Switching element function		Analog current or voltage output, programmable 2 switch outputs, programmable
Object distance		0.5 ... 3 mm , recommended: 1.5 mm
Measuring range		0 ... 120 mm
Linearity range		1 ... 119 mm
Nominal ratings
Operating voltage		12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized)
Reverse polarity protection		reverse polarity protected
Linearity error		within measuring range: ± 0.8 mm within linearity range: ± 0.4 mm
Repeat accuracy		± 0.1 mm
Resolution		50 µm
Temperature drift		± 0.5 mm (-25 °C ... 70 °C)
No-load supply current		≤ 40 mA
Operating voltage indicator		LED green
Functional safety related parameters
MTTF_d		278 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
LED S1		switching state Switching output 1
LED S2		switching state Switching output 2
LED S3		Damping element in the configured analog measuring range
LED STATUS		Status display LED, green/red (Power on, communication/error, missing damping element)
Interface
Interface type		IO-Link (via C/Q = Pin 4)
IO-Link revision		1.1
Device profile		Smart Sensor
Device ID		0x200404 (2098180)
Transfer rate		COM2 (38.4 kBit/s)
Value range		0000h ... 9600h
Min. cycle time		2.3 ms
Process data width		Process data input: 16 Bit Process data output: none
SIO mode support		yes
Compatible master port type		A
Switching output
Output type		2 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection, surge-proof
Operating current		≤ 100 mA / Output
Switching window		± 1 mm
Switching hysteresis		0.2 mm
Voltage drop		≤ 3 V
Short-circuit protection		pulsing
Analog output
Output type		1 current output: 4 ... 20 mA or 1 voltage output: 0 ... 10 V , programmable
Load resistor		current output: ≤ 400 Ω voltage output: ≥ 1000 Ω
Short-circuit protection		voltage output: current limit
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 EN 60947-5-7:2003 EN61131-9:2013 IEC 60947-5-7:2003 IEC 61131-9:2013
Approvals and certificates
IECEx approval
	Equipment protection level Gc (ec)	IECEx TUR 21.0019X
	Equipment protection level Dc (tc)	IECEx TUR 21.0020X
ATEX approval
	Equipment protection level Gc (ec)	TÜV 20 ATEX 8525 X
	Equipment protection level Dc (tc)	TÜV 20 ATEX 8526 X
UL approval		cULus Listed, Class 2 Power Source, Type 1 enclosure
Marine approval		DNVGL TAA00001V2
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		5-pin, M12 x 1 connector
Degree of protection		IP67 / IP69K
Material
	Housing	PBT, stainless steel 1.4571 , brass, nickel-plated
	Target	mild steel, e. g. 1.0037, SR235JR (formerly St37-2)
Mass		113 g
Dimensions
	Height	40 mm
	Width	23 mm
	Length	135.2 mm
General information
Use in the hazardous area		see instruction manuals

Classifications

System	Classcode
ECLASS 13.0	27274004
ECLASS 12.0	27274004
ECLASS 11.0	27270702
ECLASS 10.0.1	27270702
ECLASS 9.0	27270702
ECLASS 8.0	27270702
ECLASS 5.1	27270702
ETIM 9.0	EC001852
ETIM 8.0	EC001852
ETIM 7.0	EC001852
ETIM 6.0	EC001852
ETIM 5.0	EC001852
UNSPSC 12.1	39121550

Details: PMI120-F90-IU2EP-IO-V15-3G-3D

Informative Literature: PMI120-F90-IU2EP-IO-V15-3G-3D

Literature	Kieli	Tiedostotyyppi	Tiedoston koko
Application Report - Precise Dancer Control in Battery Cell Manufacturing	ENG	PDF	144 KB
Application Report - Reliable Detection in the Production of Motor Chain Tensioners	ENG	PDF	186 KB

Product Documentation: PMI120-F90-IU2EP-IO-V15-3G-3D

Product information	Kieli	Tiedostotyyppi	Tiedoston koko
Installation and Design Notes for Position Sensors, F90 Series	ENG	PDF	311 KB
Installation and user instructions for offline parameterization of IO-Link sensors	ENG	PDF	1788 KB
Safety and Security Documentation
Käyttöohje	FIN	PDF	230 KB
Manuals
Manual PMIxxx-F90-...-IO-... Inductive Positioning Measurement System with IO-Link	ENG	PDF	2695 KB
Parameter Information
Brief instructions	ENG	PDF	566 KB

Design / Simulation: PMI120-F90-IU2EP-IO-V15-3G-3D

CAD	Kieli	Tiedostotyyppi	Tiedoston koko
CAD 3-D / CAD 3-D	ALL	STP	706 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	161 KB

Approvals: PMI120-F90-IU2EP-IO-V15-3G-3D

Certificates	Sertifikaatin nro	Kieli	Tiedostotyyppi	Tiedoston koko
- DNV Marine	TAA00001V2 Rev. No: 5	ALL	PDF	385 KB
Canada USA UL Ordinary Location	UL-CA-2133562-0 / UL-US-2140037-0	ALL	PDF	546 KB
Europe TUV Rheinland ATEX ec 3G	TÜV 20 ATEX 8525 X	ALL	PDF	524 KB
Europe TUV Rheinland ATEX tc 3D	TÜV 20 ATEX 8526 X	ALL	PDF	4375 KB
IO-Link Manufacturer Declaration	CERT-4518	ALL	PDF	244 KB
Worldwide TUV Rheinland IECEx ec	IECEx TUR 21.0019X	ALL	LINK	---
Worldwide TUV Rheinland IECEx tc	IECEx TUR 21.0020X	ALL	LINK	---

Software: PMI120-F90-IU2EP-IO-V15-3G-3D

Device Description Files/Drivers	Julkaisutiedot	Tiedostotyyppi	Tiedoston koko
IODD for PMI120-F90-IU2EP-IO-3G-3D / IODD für PMI120-F90-IU2EP-IO-3G-3D	V1.10.000 / 2021-08-15	ZIP	192 KB
Function block TIA Portal for evaluating process data of the sensor PMI-F90-IO-* / Funktionsbaustein TIA Portal zum Auswerten der Prozessdaten des Sensors PMI-F90-IO-*	V1.00.000 / 2022-08-23	ZIP	483 KB
Function block TIA Portal for parameterization of the sensor PMI-F90-IO-* / Funktionsbaustein TIA Portal zur Parametrierung des Sensors PMI-F90-IO-*	V1.00.000 / 2022-08-23	ZIP	571 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool	V1.00.006 / 2022-07-10	ZIP	96138 KB

Liitännäistuotteet: PMI120-F90-IU2EP-IO-V15-3G-3D

Accessories

	BT-F90-W Damping element
	Damping element for sensors of type F90, F112, and F166; side holefa

	MH-F90 Mounting bracket
	Mounting bracket for mounting of F90 sensors, Material: Metal sheet (steel), zinc-platedfa

	ICE2-8IOL-K45S-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	ICE3-8IOL-K45P-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, push-in terminalsfa

	ICE3-8IOL-K45S-RJ45 IO-Link master
	PROFINET IO IO-Link master with 8 inputs/outputs, DIN rail, screw terminalfa

	IO-Link-Master02-USB IO-Link master
	IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

	ICE2-8IOL-K45P-RJ45 IO-Link master
	EtherNet/IP IO-Link master with 8 inputs/outputs, DIN rail, push-in connectorsfa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.