Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
PMI15V-F166-EP-IO-1M-V1
General specifications |
Switching element function | Push-pull (4 in 1) output |
Object distance | 0.5 ... 2 mm |
Measuring range | 0 ... 15 mm |
Nominal ratings |
Operating voltage | 18 ... 30 V DC |
Reverse polarity protection | reverse polarity protected |
Linearity error | ± 0.3 mm (for 1 mm object distance)
|
Repeat accuracy | ± 0.05 mm |
Resolution | 10 µm |
Temperature drift | ± 0.4 mm in the range 0.5 mm ... 14.5 mm (for 1 mm object distance)
|
No-load supply current | ≤ 20 mA |
Functional safety related parameters |
MTTFd | 830 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Interface |
Interface type | IO-Link (via C/Q = Pin 4) |
IO-Link revision | 1.1 |
Device profile | Identification and Diagnosis - I&D Smart Sensor - SSP 0 Smart Sensor - SSP 3.1
|
Process data | Input 4 byte - Measurement value 16 bit - Scale 8 bit - Signal quality indicator 2 bit - Switching signal 1 1 bit - Switching signal 2 1 bit |
Vendor ID | 1 (0x0001) |
Device ID | 2098433 (0x200501) |
Transfer rate | COM2 (38.4 kBit/s) |
Min. cycle time | 3 ms |
SIO mode support | yes |
Compatible master port type | Class A Class B |
Switching output |
Output type | 1 Push-pull (4 in 1) output , short-circuit protected , reverse polarity protected , overvoltage protected , programmable |
Operating current | ≤ 100 mA / Output |
Switching hysteresis | 3-step, adjustable 0.4 ... 1 mm |
Voltage drop | ≤ 3 V |
Short-circuit protection | pulsing |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2 |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
Approvals and certificates |
UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
Ambient conditions |
Ambient temperature | -25 ... 80 °C (-13 ... 176 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Mechanical specifications |
Connection type | fixed cable with plug |
Degree of protection | IP65 |
Material | |
| Housing | Zinc diecast, nickel-plated cover , PBT |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) |
Connector | |
| Threading | M12 |
| Number of pins | 3 |
Cable | |
| Cable diameter | 4.8 mm ± 0.2 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Core cross section | 0.25 mm2 |
| Shield | yes |
| Length | 1 m |
Mass | 75 g |
Dimensions | |
| Height | 17.7 mm |
| Width | 30 mm |
| Length | 39 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27274004 |
ECLASS 12.0 | 27274004 |
ECLASS 11.0 | 27270702 |
ECLASS 10.0.1 | 27270702 |
ECLASS 9.0 | 27270702 |
ECLASS 8.0 | 27270702 |
ECLASS 5.1 | 27270702 |
ETIM 9.0 | EC001852 |
ETIM 8.0 | EC001852 |
ETIM 7.0 | EC001852 |
ETIM 6.0 | EC001852 |
ETIM 5.0 | EC001852 |
UNSPSC 12.1 | 39121550 |
Details:
PMI15V-F166-EP-IO-1M-V1
Product Documentation:
PMI15V-F166-EP-IO-1M-V1
Design / Simulation:
PMI15V-F166-EP-IO-1M-V1
Approvals:
PMI15V-F166-EP-IO-1M-V1
Software:
PMI15V-F166-EP-IO-1M-V1
Liitännäistuotteet:
PMI15V-F166-EP-IO-1M-V1
Accessories |
|
|
|
Damping element for sensors of type F90, F112, and F166; side holefa |
|
|
|
|
Damping element for sensors of type F90, F112, and F166; front holefa |
|
|
|
|
torque screwdriver (0.6 Nm)fa |
|
|
|
|
plug-in cap M12fa |
|