Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Search characteristics | ||
---|---|---|
Network configuration | TN-C | |
General specifications | ||
Device type | type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1 |
|
Number of protected supply lines | 3 | |
Suitable components | protection module M-LB-1.275.M | |
Electrical specifications | ||
Nominal voltage | 230 V AC, 50 ... 60 Hz 400 V AC, 50 ... 60 Hz |
|
Maximum continuous operating voltage | 275 V AC, 50 ... 60 Hz | |
Temporary over-voltage | 335 V / 5 s (TOV withstand) | |
Nominal discharge current (8/20 µs) | 20 kA | |
Max. surge current (8/20 µs) | 40 kA | |
Voltage protection level | max. 1.25 kV max. 1 kV at 5 kA |
|
Reaction time | max. 25 ns | |
Short-circuit-proof | 50 kA eff | |
Overcurrent protection | max. 125 A gG , mains-side | |
Fault indication output | ||
Connection | terminals 11, 12, 14 | |
Output | volt-free change-over contact | |
Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
|
Indicators/settings | ||
Display elements | status display operating state (green) fault indication (red) |
|
Directive conformity | ||
Low voltage | ||
Directive 2014/35/EU | EN 61643-11:2012 | |
Conformity | ||
Degree of protection | IEC 60529 | |
Shock resistance | EN 60068-2 | |
Vibration resistance | EN 60068-2 | |
Ambient conditions | ||
Ambient temperature | -40 ... 80 °C (-40 ... 176 °F) | |
Relative humidity | 5 ... 95 % | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Core cross section | - min. 1.5 mm2 solid/flexible - max. 35 mm2 stranded/25 mm2 flexible - max. 1.5 mm2 solid/flexible (for remote signalling contact) |
|
Material | ||
Housing | thermoplastic, color grey , UL 94 V-0 | |
Mass | approx. 360 g | |
Dimensions | 54 x 90 x 72 mm (2.1 x 3.6 x 2.8 inch) (W x H x D) , 3 TE acc. to DIN 43880 | |
Height | 90 mm | |
Width | 54 mm | |
Depth | 72 mm | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
General information | ||
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27171202 |
ECLASS 12.0 | 27171202 |
ECLASS 11.0 | 27130805 |
ECLASS 10.0.1 | 27130805 |
ECLASS 9.0 | 27130805 |
ECLASS 8.0 | 27130805 |
ECLASS 5.1 | 27130801 |
ETIM 9.0 | EC000941 |
ETIM 8.0 | EC000941 |
ETIM 7.0 | EC000941 |
ETIM 6.0 | EC000941 |
ETIM 5.0 | EC000941 |
UNSPSC 12.1 | 39121610 |
This device is a modular surge protection barrier (type 2 acc. to EN 61643-11) with error message output (floating changeover contact).
The complete device consists of a base module and plug-in protection modules and is ready for installation.
Every protection module is locked in the base module and can be changed without tools via release buttons.
Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 856 KB |
CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1895 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|---|
Europe KEMA Surge Protective Device | KEMA 2179748.06 | ALL | 219 KB | |
USA UL Surge Protective Device UL | E346845 UL (VZCA2) | ALL | 235 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0925A | ALL | 67 KB |