Wireless Access Point (Ex d) GUB3L.I.CP-Y*
- Aluminum alloy
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Ex d and Ex tb certified
- Gas group IIC
- Use of industrial Wireless Access Points in hazardous areas
- External antennas for best possible signal dispersion
- Customizable configuration of WI-FI and network devices and cable entries as per specification
- Image and drawing are generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot GUB3L.I.CP-Y*
| Tuotekuvaus |
|---|
| Wireless Access Point in aluminum alloy enclosure for use in explosion-hazardous areas |
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 1500 V DC / 1000 V AC max. | |
| Operating current | recommended: 1600 A max. | |
| Mechanical specifications | ||
| Thread type | metric ISO pitch 1.5 mm or NPT ANSI ASME B1.20.1 | |
| Enclosure cover | threaded round cover | |
| Cover fixing | flamepath thread | |
| Cover seal | none, O-ring for IP66/67 | |
| Degree of protection | IP66 (IP66/IP67 with O-ring) | |
| Material | ||
| Enclosure | aluminum alloy | |
| Finish | epoxy coated RAL 7005 (grey) | |
| O-Ring | silicone | |
| Mass | 21 kg | |
| Dimensions | 360 mm x 360 mm x 219 mm values might differ slightly due to casting and manufacturing tolerances |
|
| Mounting | see datasheets of relevant enclosures | |
| Grounding | M6 external grounding points | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 50 °C (-40 ... 122 °F) depending on integrated components |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | INERIS 14 ATEX 0035X | |
| Marking |  II 2 GD Ex db IIC T* Gb Ex tb IIIC T** °C Db T6/T85 °C T5/T100 °C T4/T135 °C T3/T200 °C depending on configuration, ambient temperature and built-in power loss |
|
| International approvals | ||
| IECEx approval | IECEx INE 14.0042X | |
| Further approvals | available on request | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| CE marking | 0080 or 0102, see type label | |
| General information | ||
| Ordering information | This Wireless Access Point solution will be delivered completely configured and assembled ready for use. For configuration details please contact customer service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
| General specifications | ||
| Installed components | All major WI-FI Access Point vendors such as Aruba, Cisco, ect. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180502 |
| ECLASS 12.0 | 27180502 |
| ECLASS 11.0 | 27180502 |
| ECLASS 10.0.1 | 27180502 |
| ECLASS 9.0 | 27180502 |
| ECLASS 8.0 | 27180508 |
| ECLASS 5.1 | 27180502 |
| ETIM 9.0 | EC002503 |
| ETIM 8.0 | EC002503 |
| ETIM 7.0 | EC002503 |
| ETIM 6.0 | EC002503 |
| ETIM 5.0 | EC002503 |
| UNSPSC 12.1 | 39121314 |
Details: GUB3L.I.CP-Y*
Function
Based on an aluminum alloy enclosure, this Wireless Access Point solution is specifically designed for installation in hazardous areas, including Zone 1, Zone 2, Zone 21, and Zone 22. The system allows the use of industrial Wireless Access Points in hazardous areas, ensuring seamless connectivity while maintaining safety standards. In addition to the Wireless Access Point, the solution also includes a patch panel to quickly connect the Wireless Access Point to the company's own network. Pepperl+Fuchs solution engineering teams offer many size and design options for the Ex d IIC and Ex tb certified flameproof enclosures with any custom configuration including WI-FI and network devices and cable entries to meet various requirements. Explosion-proof antennas are mounted on the enclosure to ensure the best possible distribution of radio frequency signals.
Product Documentation: GUB3L.I.CP-Y*
| Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Brief Instructions - GUB* / GUBX* | ENG | 316 KB |
Approvals: GUB3L.I.CP-Y*
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| Europe INERIS ATEX | INERIS 14 ATEX 0035X | ALL | 529 KB | |
| Worldwide INERIS IECEx Certificate of Conformity | IECEx INE 14.0042X | ALL | LINK | --- |
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.