Connection cable, Ethernet V1D-M16H-GN1M-PUR-E1S-V45-G
- Hard-wearing PUR cable
- Suitable for drag chains and abrasion resistant
- Industrial Ethernet
- D coding for Ethernet
- Conforms to PROFINET
- CAT5/CAT5e cable
- Free of paint wetting interfering substances
- Halogen-free
- Rear/screw mounting
- Image is generic for this device type and may deviate from the specific variant
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot V1D-M16H-GN1M-PUR-E1S-V45-G
| Tuotekuvaus |
|---|
| Ethernet bus cable receptacle M12 socket straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitable |
| General specifications | ||
|---|---|---|
| Connector 1 | ||
| Connection | socket | |
| Construction type | M12 | |
| Style | straight | |
| Locking | screw connection | |
| Number of pins | 4 | |
| Coding | D-coded | |
| Customization | Receptacles | |
| Connector 2 | ||
| Connection | plug | |
| Construction type | RJ45 | |
| Style | straight | |
| Locking | snap locking | |
| Number of pins | 8 | |
| Coding | EtherNet/IP / PROFINET | |
| Electrical specifications | ||
| Operating voltage | max. 48 V AC / 60 V DC | |
| Conformity | ||
| Degree of protection | EN 60529 | |
| Plug connection | connector M12 x 1 : IEC 61076-2-101 connector RJ45 : IEC 60603-7 |
|
| Component category | CAT5 (IEC 11801) , CAT5e (IEC 61156-6) | |
| Flammability | IEC 60332-1-2 / UL 2556 / ISO 6722-1 5.22 (UN ECE-R 118.01) | |
| Ambient conditions | ||
| Ambient temperature | ||
| Connector 1 | -40 ... 90 °C (-40 ... 194 °F) | |
| Cable, fixed installation | -30 ... 70 °C (-22 ... 158 °F) , UL: -20 ... 70 °C (-4 ... 158 °F) | |
| Cable, flexing | -20 ... 70 °C (-4 ... 158 °F) | |
| Mechanical specifications | ||
| Connector 1 | ||
| Tightening torque | 0.6 Nm | |
| Tool installation | Rear mounting M16 , SW = 17 mm and SW = 19 mm | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP67 | |
| Connector 2 | ||
| Loosening protection | available | |
| Mating cycles | min. 100 | |
| Shielding | shield connected to connector | |
| Degree of protection | IP20 | |
| Cable | according to IEC/EN 60228 (DIN VDE 0295) class 5 | |
| Sheath diameter | 6 mm | |
| Bending radius | > 10 x cable diameter, movable installation > 8 x cable diameter, fixed installation |
|
| Sheath stripping force | max. 60 N / 100 mm | |
| Sheath color | green (similar to RAL 6018) | |
| Number of cores | 4 | |
| Core cross section | 0.34 mm2 / 22 AWG | |
| Cores color | Core 1-1: yellow Core 2-3: white Core 3-2: orange Core 4-6: blue |
|
| Core construction | 7 x 0.254 mm ∅ twisted quad |
|
| Shield | aluminum-lined polyester foil Tinned copper braiding |
|
| Length | 1 m | |
| Drag chain suitability | ||
| Drag chain cycles | max. 1000000 | |
| Motion velocity | max. 3 m/s | |
| Traverse distance | max. 5 m | |
| Acceleration | max. 2 m/s2 | |
| Mass | 73.04 g | |
| Material | ||
| PWIS free | yes | |
| Halogen-free | yes | |
| Connector 1 | ||
| Screw connection | Zinc diecast, nickel-plated | |
| Seal | FKM | |
| Contact surface | Au | |
| Flammability | V-2 | |
| Connector 2 | ||
| Body | PA, green | |
| Flammability | V-0 | |
| Cable | ||
| Sheathing | PUR based on polyether | |
| Core insulation | PP | |
| Flammability | FT2 complies with UN ECE-R 118.01 |
|
| General information | ||
| Scope of delivery | locknut included | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27060307 |
| ECLASS 12.0 | 27060307 |
| ECLASS 11.0 | 27060307 |
| ECLASS 10.0.1 | 27060307 |
| ECLASS 9.0 | 27060390 |
| ECLASS 8.0 | 27060390 |
| ECLASS 5.1 | 27279201 |
| ETIM 9.0 | EC001855 |
| ETIM 8.0 | EC001855 |
| ETIM 7.0 | EC001855 |
| ETIM 6.0 | EC001855 |
| ETIM 5.0 | EC002585 |
| UNSPSC 12.1 | 31251501 |
Details: V1D-M16H-GN1M-PUR-E1S-V45-G
Design / Simulation: V1D-M16H-GN1M-PUR-E1S-V45-G
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2517 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: V1D-M16H-GN1M-PUR-E1S-V45-G
| Declaration of Conformity | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4458A | ALL | 287 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6744 | ALL | 213 KB |
Liitännäistuotteet: V1D-M16H-GN1M-PUR-E1S-V45-G
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.