Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291
Teollisuusanturit

2-D LiDAR Sensor OBD30M-R2000-1L-Y70112344

OBD30M-R2000-1L-Y70112344
  • 4 freely programmable monitoring fields
  • 4 inputs/outputs (selectable)
  • High operating range
  • 360°-angle of measurement
  • Measuring method PRT (Pulse Ranging Technology)
  • Very narrow scan plane

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  OBD30M-R2000-1L-Y70112344

Tuotekuvaus
R2000 Detection, 2-D LiDAR sensor for precise field monitoring, measuring range to object up to 30 m
General specifications
Measuring range0.1 ... 10 m (black 10%)
0,1 … 30 m (white 90 %)
0,1 … 30 m (reflector)
Min. reflectivity 2.5%
Light sourcelaser diode
Light typemodulated infrared light
Laser nominal ratings
NoteLASER RADIATION , DO NOT STARE INTO BEAM
Laser class1
Wave length905 nm
Beam divergencetransversal 10 mrad , longitudinal 2 mrad
Pulse length5 ns
Repetition rate54 kHz
max. pulse energy< 94 nJ
Measuring methodPulse Ranging Technology (PRT)
Scan rate10 Hz, 20 Hz, 30 Hz
Scanning angle360°
Diameter of the light spot105 mm x 25 mm at 10 m
Ambient light limit80000 Lux
Functional safety related parameters
MTTFd75 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Data flow indicatorLED yellow: active ethernet
LED green: Ethernet link
Function indicatorLED red: fault
Yellow LED: I/Q1 + I/Q2
Control elements2 Button
Parameterization indicator24 x 252 pixels , red
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 % within the supply tolerance
No-load supply current≤ 400 mA / 24 V DC
Power consumption< 10 W
Time delay before availability< 40 s
Integrated application
ApplicationField monitoring
Number of fields4
Response time30 ms + 1 Scan duration
Detectable object shapeAlmost any
Object size> 1 mm
Linking fieldsUp to 4 x 3 levels
Interface
Interface type4 x switching inputs/outputs (selectable)
Input/Output
Input/output type4 Inputs/Outputs , Independently configurable , short circuit/reverse polarity protected
Input
Switching thresholdlow: Ue < 5 V,
high: Ue > 10 V
Output
Switching thresholdlow: Ua < 1 V,
high: Ua > Ub - 2 V
Switching current100 mA per output
Conformity
Laser safetyEN 60825-1:2014
Compliance with standards and directives
Standard conformity
Product standardIEC 61000-6-2
Shock and impact resistanceEN 60068-2-6 EN 60068-2-27
Measurement accuracy
Measuring speed54000 measurements per second
Angle resolution0,071°; 0,15°; 0,2°
Repeat accuracy< 12 mm
Approvals and certificates
Protection classIII (operating voltage 50 V)
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Relative humidity95 % , no moisture condensation
Mechanical specifications
Degree of protectionIP65
Connection4-pin, M12x1 connector, standard (supply) ,
8-pin, M12x1 connector, A-coded (MultiPort) ,
4-pin, M12x1 socket, D-coded (LAN)
Material
HousingABS + PC + Aluminum
Optical facePMMA
Massapprox. 0.8 kg
Dimensions
Height116.5 mm
Width106 mm
Length106 mm

Classifications

SystemClasscode
ECLASS 13.027270913
ECLASS 12.027270913
ECLASS 11.027270913
ECLASS 10.0.127270913
ECLASS 9.027270913
ECLASS 8.027270913
ECLASS 5.127270801
ETIM 9.0EC001825
ETIM 8.0EC001825
ETIM 7.0EC001825
ETIM 6.0EC001825
ETIM 5.0EC001825
UNSPSC 12.141111613

Details: OBD30M-R2000-1L-Y70112344

Function

Based on Pulse Ranging Technology (PRT), the sensor is powerful for measurements with a long range and a small light spot. The device scans its environment over the complete measuring angle of 360°. Due to the high scanning frequency, this sensor type is suitable for advanced applications. The device meets laser class 1 and is eye safe. Additional precautions to protect the operating personnel are not required. The interactive all-round display integrated in the optical surface can freely display individual texts and graphics. A wide range of accessories enables the sensor to be used in different applications. A PACTware device type manager (DTM) specially developed for this series offers extensive configuration and diagnostic options.

Product Documentation: OBD30M-R2000-1L-Y70112344

Language Selection:
Brief InstructionsKieliTiedostotyyppiTiedoston koko
Brief Instructions - OBD*R2000*ENGPDF1550 KB
Manuals
DTM Manual "Device Type Manager R2000" (Software Manual)ENGPDF5396 KB
Manual OBD*M-R2000-*ENGPDF1709 KB
Software Information
OMDxxx-R2000 Firmware v1.62 release notes / OMDxxx-R2000 Firmware v1.62 VersionshinweiseALLPDF395 KB
R2000 Detection firmware v1.62 release notes / R2000 Detection Firmware v1.62 VersionshinweiseALLPDF344 KB

Design / Simulation: OBD30M-R2000-1L-Y70112344

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP2250 KB
CAD Portal / CAD PortalALLLINK---

Approvals: OBD30M-R2000-1L-Y70112344

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
Canada USA UL Ordinary LocationUL-CA-L87056-31-91205102-0 / UL-US-L87056-11-91205102-0ALLPDF545 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0074GALLPDF308 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5254ALLPDF229 KB

Software: OBD30M-R2000-1L-Y70112344

Language Selection:
Device Description Files/DriversJulkaisutiedotTiedostotyyppiTiedoston koko
DTM / DTMv1.4.0.1ZIP5451 KB
Software Tools
PACTware 5.0 / PACTware 5.05.0.5.31ZIP44203 KB

Liitännäistuotteet: OBD30M-R2000-1L-Y70112344

Accessories

Male connector M12 straight D-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable black, UL approved, drag chain suitable, torsion resistantfa

Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa
M12 protective cap set (connector + socket) for series LS610 / LS611fa
Function grounding for LS610 / LS611 / VDM100 seriesfa
Mounting aid for R2000 series, Quick clamp and adjustment system, Simple and fast mountingfa
Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa
General Notes Relating to Pepperl+Fuchs Product Information
© 2024 Kaikki oikeudet pidätetään.

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.