Absolute rotary encoder ENA58IL-S10CA5-1516B30-RBD
- Solid shaft
- Communication via MODBUS RTU
- Free of wear magnetic sampling
- High resolution and accuracy
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot ENA58IL-S10CA5-1516B30-RBD
| General specifications | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Absolute rotary encoder | |
| Linearity error | ≤ ± 0.1 ° | |
| Functional safety related parameters | ||
| Mission Time (TM) | 20 a | |
| L10 | 55 E+8 revolutions at 40/110 N axial/radial shaft load | |
| Diagnostic Coverage (DC) | 0 % | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V | |
| No-load supply current | typ. 150 mA | |
| Power consumption | approx. 1 W | |
| Time delay before availability | < 1 s | |
| Output code | binary code | |
| Code course (counting direction) | adjustable | |
| Interface | ||
| Interface type | MODBUS RTU |
|
| Resolution | ||
| Single turn | up to 16 Bit , factory setting: 13 Bit | |
| Multiturn | up to 12 Bit , factory setting: 15 Bit | |
| Overall resolution | up to 31 Bit , factory setting: 25 Bit | |
| Transfer rate | factory setting 19,2 kBit/s adjustable : 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600, 76800, 115200, 256000 Bit/s |
|
| Address setting | node number adjustable, factory default 127 | |
| Cycle time | < 50 µs | |
| Standard conformity | RS 485 | |
| Connection | ||
| Connector | M12 connector, 5 pin | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP65 | |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms | |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 1000 Hz | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. | |
| Ambient conditions | ||
| Operating temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| Mechanical specifications | ||
| Material | ||
| Housing | nickel-plated steel , painted | |
| Flange | Aluminum | |
| Shaft | Stainless steel | |
| Mass | approx. 300 g | |
| Rotational speed | max. 6000 min -1 | |
| Moment of inertia | 50 gcm2 | |
| Starting torque | < 3 Ncm at 20 °C | |
| Shaft load | ||
| Axial | 40 N | |
| Radial | 110 N | |
| Factory settings | ||
| Default setting | ||
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270502 |
| ECLASS 12.0 | 27270502 |
| ECLASS 11.0 | 27270502 |
| ECLASS 10.0.1 | 27270502 |
| ECLASS 9.0 | 27270502 |
| ECLASS 8.0 | 27270502 |
| ECLASS 5.1 | 27270502 |
| ETIM 9.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 5.0 | EC001486 |
| UNSPSC 12.1 | 39121527 |
Details: ENA58IL-S10CA5-1516B30-RBD
Function
The ENA58IL series are high precision encoders with internal magnetic sampling.
This multiturn absolute rotary encoder transmits a position value corresponding to the shaft setting via the MODBUS RTU interface.
The position values are transferred in a serial format via a 2 wire bus (RS 485).
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.