Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
RL29-8-H-1200-RT/115b/136
| Tuotekuvaus |
| Background suppression sensor |
| General specifications |
| Detection range | 30 ... 1200 mm , adjustable |
| Detection range min. | 20 ... 200 mm |
| Detection range max. | 30 ... 1200 mm |
| Background suppression | max. + 10 % of the upper limit of the detection range |
| Light source | LED 660 nm |
| Light type | modulated visible red light |
| Black-white difference (6 %/90 %) | < 35 % at 1200 mm sensor range |
| Diameter of the light spot | approx. 25 mm at a distance of 1200 mm |
| Opening angle | Emitter: 1.2 ° , Receiver: 2 ° |
| Ambient light limit | 50000 Lux |
| Functional safety related parameters |
| MTTFd | 720 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function indicator | LED yellow: switching state |
| Control elements | Sensing range adjuster |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | 10 % |
| No-load supply current | ≤ 40 mA |
| Output |
| Switching type | light-on |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Switching frequency | 125 Hz |
| Response time | 4 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Ambient conditions |
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature | -40 ... 75 °C (-40 ... 167 °F) |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | with 0.2 m fixed cable and 4-pin, M12 connector |
| Material | |
| Housing | Plastic ABS |
| Optical face | plastic |
| Mass | 90 g |
| Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 54.3 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270904 |
| ECLASS 10.0.1 | 27270904 |
| ECLASS 9.0 | 27270904 |
| ECLASS 8.0 | 27270904 |
| ECLASS 5.1 | 27270904 |
| ETIM 9.0 | EC002719 |
| ETIM 8.0 | EC002719 |
| ETIM 7.0 | EC002719 |
| ETIM 6.0 | EC002719 |
| ETIM 5.0 | EC002719 |
| UNSPSC 12.1 | 39121528 |
Details:
RL29-8-H-1200-RT/115b/136
Product Documentation:
RL29-8-H-1200-RT/115b/136
Design / Simulation:
RL29-8-H-1200-RT/115b/136
Approvals:
RL29-8-H-1200-RT/115b/136
Liitännäistuotteet:
RL29-8-H-1200-RT/115b/136
| Accessories |
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|
|
|
|
| Mounting aid for RL* seriesfa |
|
|
|
|
| Mounting bracket for rear wall mountingfa |
|
|
|
|
| Weld slag cover modelfa |
|
+358 20 7861 290