Relay Module HiC5863

1-channel signal conditioner
24 V DC supply (loop powered)
Logic input 19 V DC ... 27.6 V DC
Relay contact output for energized to safe function
Test pulse immunity
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Associated Products

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot HiC5863

General specifications
Signal type		Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Systematic capability (SC)		SC 3
Supply
Connection		loop powered
Rated voltage		19 ... 30 V DC loop powered
Power dissipation		< 1.3 W
Power consumption		< 1.3 W
Input
Connection side		control side
Connection		Input SL1: 8a(+), 7a(-) ; test input SL1: 3a(-), 3b(+), 4a(+), 4b(+)
Pulse/Pause ratio		150 ms / 150 ms
Test pulse length		max. 4 ms from DO card
Test input		see functional safety manual
Signal level		0-signal: -5 ... 5 V 1-signal: 19 ... 27.6 V
Rated voltage		19 ... 27.6 V loop powered
Rated current		0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Output
Connection side		field side
Connection		SL2: 5a, 5b
Contact loading		30 V DC/1 A resistive load
Minimum switch current		10 mA / 24 V DC
Energized/De-energized delay		150 ms / 150 ms
Mechanical life		2 x 10⁷ switching cycles
Transfer characteristics
Switching frequency		< 3 Hz
Galvanic isolation
Input/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V_eff
Output/Output		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V_eff
Indicators/settings
Display elements		LEDs
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility		NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008
Degree of protection		IEC 60529:2013
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		no pin trimmed For further information see system description.
Data for application in connection with hazardous areas
Certificate		PF 17 CERT 4192 X
	Marking	II 3G Ex nC ec IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010
International approvals
UL approval		E106378
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210101
ECLASS 12.0	27210101
ECLASS 11.0	27210101
ECLASS 10.0.1	27210101
ECLASS 9.0	27210101
ECLASS 8.0	27210101
ECLASS 5.1	27210121
ETIM 9.0	EC001485
ETIM 8.0	EC001485
ETIM 7.0	EC001485
ETIM 6.0	EC001485
ETIM 5.0	EC001485
UNSPSC 12.1	39121543

Details: HiC5863

Function

This signal conditioner provides the galvanic isolation between field circuits and control circuits.

The device is a relay module that is suitable for safely switching applications of a load circuit. The device isolates load circuits up to 30 V and the 24 V control circuit.

The energized to safe (ETS) function is permitted for SIL 3 applications.

For testing of the relays, test terminals can be used. The test mode will be indicated by a LED according to NAMUR NE44.

Product Documentation: HiC5863

Safety and Security Documentation	Kieli	Tiedostotyyppi	Tiedoston koko
Käyttöohje	FIN	PDF	123 KB
Functional Safety Manual	ENG	PDF	1927 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC5863

CAD	Kieli	Tiedostotyyppi	Tiedoston koko
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ	ALL	EDZ	57 KB

Approvals: HiC5863

Certificates	Sertifikaatin nro	Kieli	Tiedostotyyppi	Tiedoston koko
Europe Pepperl+Fuchs ATEX Category 3 G Certificate of Compliance	PF17CERT4192X	ALL	PDF	200 KB
USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378	CoC 20180927 - E106378 RepRef 20180926	ALL	PDF	252 KB
cULus	2018-11-22-E223772	ALL	PDF	266 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-3547B	ALL	PDF	80 KB

Liitännäistuotteet: HiC5863

Accessory of

	HiCTB08-YRS-RRB-AK-CC-DO08-Y1 Termination Board
	System board for Yokogawa ProSafe-RS, For 8-channel DO card SDV531, For 8 modules, Recommended modules: HiC2883 (DO), HiC5861 (DO), HiC5863 (DO), 24 V DC supply, Hazardous area: spring terminals, blue, Non-hazardous area: Yokogawa system connector, 50-pin, Number of modules: 8, Signal type: Digital Output, Manufacturer: Yokogawa, Control system type: ProSafe-RSpa

	HiCTB16-YRS-RRB-AK-CC-DO16-Y1 Termination Board
	System board for Yokogawa ProSafe-RS, For 16-channel DO card SDV541, For 16 modules, Recommended modules: HiC2883 (DO), HiC5861 (DO), HiC5863 (DO), 24 V DC supply, Hazardous area: spring terminals, blue, Non-hazardous area: Yokogawa system connector, 50-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Yokogawa, Control system type: ProSafe-RSpa

	HiCTB16-TRX-RAC-PL-IO16 Termination Board
	System board for Schneider Electric, Tricon CX series by Triconex, TAN48 approval, For 16-channel universal I/O card 3902(A)X and AO card 3809(A)X, For 16 modules, Supported signal types: DI/DO/AI/TI/AO/UIO, 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: Sub-D connector (male), 50-pin, Up to SIL 3 acc. to IEC/EN 61508, Number of modules: 16, Signal type: Analog output Universal, Manufacturer: Triconex, Control system type: Tricon CXpa

	HiCTB16-TRX-RAC-PL-DO16 Termination Board
	System board for Schneider Electric, Tricon CX series by Triconex, TAN48 approval, For 32-channel (16+16) DO card 3626X, For 16 modules, Recommended modules: HiC2871A (DO), HiC2873 (DO), HiC2883 (DO), HiC5861 (DO), HiC5863 (DO), 24 V DC supply, Hazardous area: pluggable screw terminals, blue, Non-hazardous area: ELCO socket, 56-pin, Number of modules: 16, Signal type: Digital Output, Manufacturer: Triconex, Control system type: Tricon CXpa

General Notes Relating to Pepperl+Fuchs Product Information

Pikalinkit

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
phone +358 20 7861 290
info@fi.pepperl-fuchs.com
phone +358 20 7861 291

Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.