Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
LS610-DA-P/F1
| Tuotekuvaus |
| Optical data coupler for PROFIBUS, 120 m detection range, infrared light, M12 plug |
| General specifications |
| Effective detection range | 0 ... 120 m |
| Threshold detection range | 140 m |
| Light type | modulated infrared light |
| Diameter of the light spot | 2 m at a distance of 100 m |
| Opening angle | 1.1 ° |
| Ambient light limit | > 10000 Lux |
| Functional safety related parameters |
| MTTFd | 250 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Data flow indicator | LED green: emitter
LED yellow: receiver LED red: faulty telegram |
| Function indicator | alignment aid: flashing front red LED Signal strength (8 LED: Red, yellow, green) Baudrate, operating mode |
| Control elements | membrane keys, 2 keys, can be electrically locked |
| Electrical specifications |
| Operating voltage | 18 ... 30 V DC |
| No-load supply current | 200 mA |
| Data rate | 93.75; 187.5;(350); 500;1500 kBit/s , adjustable |
| Operation frequency | F1 = 8.25 MHz |
| Interface |
| Interface type | PROFIBUS, galvanically isolated |
| Input |
| Function input | Keylock, internal Pull-up resistor
keypad locked with 0 V |
| Output |
| Stability alarm output | 1 PNP (switches if there is sufficient operating reserve) short-circuit protected, max. 200 mA |
| Conformity |
| Product standard | EN 60947-5-2 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| Approvals | CE, cULus |
| Ambient conditions |
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | 4-pin, M12x1 connector, standard (supply) ,
5-pin, M12x1 connector, B-coded (Bus In) ,
5-pin, M12x1 socket, B-coded (Bus Out/Termination) |
| Material | |
| Housing | ABS / PC |
| Optical face | plastic |
| Mass | 700 g |
| Dimensions | |
| Height | 90 mm |
| Width | 170 mm |
| Length | 171 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 43201404 |
Details:
LS610-DA-P/F1
Product Documentation:
LS610-DA-P/F1
Design / Simulation:
LS610-DA-P/F1
Liitännäistuotteet:
LS610-DA-P/F1
| Accessories |
|
|
|
| Female connector M12 straight A-coded 5-pin, for cable diameter 6 - 8 mm, field-attachablefa |
|
|
|
|
| Terminal resistor for PROFIBUSfa |
|
|
|
|
| Function grounding for LS610 / LS611 / VDM100 seriesfa |
|
|
|
|
| M12 protective cap set (connector + socket) for series LS610 / LS611fa |
|
|
|
|
| Mounting bracket for optical data couplerfa |
|
|
|
|
| Direct mounting set consisting of 4 x M4 threaded insertsfa |
|
|
|
|
| Mounting bracket with deviation mirror for optical data couplerfa |
|
|
|
|
| Mounting bracket for optical data coupler and distance measurement devicesfa |
|
+358 20 7861 290