Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Tuotekuvaus |
---|
Double laser light sensor for measuring height and width information |
General specifications | ||
---|---|---|
Measurement range | Zmin = 55 mm Zmax = 105 mm Xmax = 25 mm |
|
Light source | Laser diodes | |
Laser nominal ratings | ||
Note | VISIBLE LASER RADIATION , DO NOT STARE INTO BEAM DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS |
|
Laser class | 2 | |
Wave length | Measuring laser 1 (blue): 405 nm Measuring laser 2 (red): 660 nm |
|
Maximum optical power output | Measuring laser 1 (blue): 2.55 mW ; C6 factor = 1.83 Measuring laser 2 (red): 2.42 mW ; C6 factor = 1.66 |
|
Scan rate | up to 900 s-1 | |
Indicators/operating means | ||
Operation indicator | LED green | |
Function indicator | LAN, laser | |
Electrical specifications | ||
Operating voltage | 24 V DC ± 10 %, SELV/PELV | |
Current consumption | nominal 1.3 A peak 2.3 A (< 500 ms) |
|
Power consumption | max. 75 W , Outputs without load | |
Interface | ||
Interface type | Ethernet via TCP/IP | |
Physical | Ethernet | |
Protocol | TCP/IP | |
Transfer rate | 100 MBit/s | |
Cable length | max. 30 m | |
Input | ||
Input voltage | 24 V | |
Number/Type | 4 digital inputs | |
Cable length | max. 30 m | |
Output | ||
Number/Type | 2 digital outputs | |
Switching type | PNP | |
Switching voltage | 24 V | |
Switching current | 150 mA each output | |
Cable length | max. 30 m | |
Conformity | ||
PWIS conformity | VDMA 24364-C1/T60-L | |
Compliance with standards and directives | ||
Directive conformity | ||
Machinery Directive 2006/42/EC | The laser profile sensor is an incomplete machine within the meaning of Art. 2 g) of Directive 2006/42/EC. It is only intended for installation in another machine or for assembly with another machine. | |
EMC Directive 2004/108/EC | EN 61000-6-2:2005 | |
Standard conformity | ||
Noise immunity | EN 61000-6-2:2005 | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Degree of protection | EN 60529 | |
Laser class | DIN EN 60825-1:2022, IEC 60825-1:2014 | |
Ambient conditions | ||
Ambient temperature | 0 ... 40 °C (32 ... 104 °F) | |
Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP40 | |
Connection | 8-pin, M12 x 1 connector (supply voltage + I/O) A-coded 4-pin, M12 x 1 socket, D-coded (Ethernet) |
|
Material | ||
Housing | Aluminum , plastic | |
Optical face | Plastic pane | |
Installation | Metal mounting only | |
Mass | 3300 g | |
Tightening torque, fastening screws | 1.5 Nm | |
Dimensions | ||
Height | 121 mm | |
Diameter | 177 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27270916 |
ECLASS 12.0 | 27270916 |
ECLASS 11.0 | 27270801 |
ECLASS 10.0.1 | 27270801 |
ECLASS 9.0 | 27270801 |
ECLASS 8.0 | 27270801 |
ECLASS 5.1 | 27270801 |
ETIM 9.0 | EC001825 |
ETIM 8.0 | EC001825 |
ETIM 7.0 | EC001825 |
ETIM 6.0 | EC001825 |
ETIM 5.0 | EC001825 |
UNSPSC 12.1 | 41111613 |
The laser profile sensor is designed for the optical control of viscous or pasty media such as adhesive beads, sealing beads, and even heat-conducting pastes. Using laser light section technology, two laser lines are projected onto the target and detected by two cameras at a specific angle. Height and width information can be determined using the triangulation principle.
With its performance hardware and software platform, the OLR enables innovative and modular solutions for performance, communication, and maintenance.
The innovative laser technology enables reliable measurements on different surfaces.
Manuals | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Mounting Instructions | ENG | 1589 KB |
CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 5211 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|