Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Tuotekuvaus |
---|
Optical Print Inspector, reading of Data Matrix codes, PROFINET, speeds up to 10 m/sec, polarization filter |
General specifications | ||
---|---|---|
Light type | Integrated LED lightning (white) | |
Polarization filter | yes | |
Symbologies | Data Matrix | |
Read distance | 70 ... 180 mm Nominal distance: 120 mm |
|
Reading field | Minimum read field: 28 mm x 45 mm Read field at nominal distance: 45 mm x 70 mm Maximum read field: 65 mm x 105 mm |
|
Modul size | Minimum module size: 0.2 mm | |
Evaluation frequency | up to 50 Hz | |
Target velocity | triggered max. 10 m/s | |
Data Matrix | ||
Symbol size | rectangular up to 144 x 144 modules rectangular up to 16 x 48 modules |
|
Data format | ASCII, C40, Text, X12, Edifact, Base 256 , all according to ISO 646 | |
Orientation | omnidirectional | |
Nominal ratings | ||
Camera | ||
Type | CMOS , Global shutter | |
Number of pixels | 752 x 480 pixels | |
Gray scale | 256 | |
Image recording | real-time , Program-controlled or triggered externally | |
Functional safety related parameters | ||
MTTFd | 40.5 a | |
Mission Time (TM) | 8 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
LED indication | 7 LEDs (communication, alignment aid, status information) | |
Electrical specifications | ||
Operating voltage | 24 V DC ± 15% , PELV | |
No-load supply current | max. 300 mA | |
Power consumption | 6 W | |
Interface | ||
Interface type | 100 BASE-TX | |
Protocol | PROFINET IO Real-Time (RT) Conformance class A | |
Transfer rate | 100 MBit/s | |
Interface 2 | ||
Interface type | USB Service | |
Input | ||
Input voltage | to be applied externally 24 V ± 15% PELV | |
Number/Type | Trigger | |
Input current | approx. 10 mA at 24 V DC | |
Switching threshold | low: < 10 V, high: > 15 V | |
Cable length | max. 30 m | |
Output | ||
Switching type | PNP | |
Switching voltage | to be applied externally 24 V ± 15 % PELV | |
Switching current | 100 mA each output | |
Cable length | max. 30 m | |
Compliance with standards and directives | ||
Standard conformity | ||
Noise immunity | EN 61326-1:2006 | |
Emitted interference | EN 61000-6-4:2007/A1:2011 | |
Degree of protection | EN 60529 | |
Photobiological safety | Risk group 1 according to IEC 62471 | |
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Approvals | CE | |
Ambient conditions | ||
Ambient temperature | 0 ... 45 °C (32 ... 113 °F) | |
Storage temperature | -20 ... 85 °C (-4 ... 185 °F) | |
Relative humidity | 90 % , noncondensing | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 8-pin, M12x1 connector, standard (supply+IO) , 4-pin, M12x1 socket, D-coded (LAN) , 4-pin, M12x1 socket, D-coded (LAN) |
|
Material | ||
Housing | PC/ABS | |
Optical face | Plastic pane | |
Installation | 4 x M6 threading | |
Mass | approx. 200 g | |
Dimensions | ||
Height | 70 mm | |
Width | 70 mm | |
Depth | 53 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27280103 |
ECLASS 12.0 | 27280103 |
ECLASS 11.0 | 27280103 |
ECLASS 10.0.1 | 27280103 |
ECLASS 9.0 | 27280103 |
ECLASS 8.0 | 27280103 |
ECLASS 5.1 | 27280103 |
ETIM 9.0 | EC002999 |
ETIM 8.0 | EC002999 |
ETIM 7.0 | EC002999 |
ETIM 6.0 | EC002999 |
ETIM 5.0 | EC002999 |
UNSPSC 12.1 | 43211701 |
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces and at varying intervals, or performing various detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor close at hand.
Literature | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Application Report - High-Speed Code Reading in the Garment Logistics | ENG | 764 KB | |
Application Report - Optical Identification System Used to Create Photo Books | ENG | 695 KB | |
Application Report - Optical Identification for Letter Distribution Facilities | ENG | 219 KB | |
Application Report - Reliable Identification of Documents in Letter Distribution Facilities | ENG | 206 KB |
Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Brief Instructions - OPC120P-F201-B17 | ENG | 335 KB | |
Manuals | |||
Integration in SIMATIC STEP 7 | ENG | 949 KB | |
Integration in SIMATIC TIA V13 | ENG | 749 KB | |
Manual Optical Print Inspector OPC120P-F201-B17 | ENG | 1295 KB |
CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
3-D model with light beam / 3-D-Modell mit Lichtkegel | ALL | STP | 490 KB |
CAD 3-D / CAD 3-D | ALL | STP | 5028 KB |
CAD Portal / CAD Portal | ALL | LINK | --- |
CAE | |||
CAE EPLAN Data Portal / CAE EPLAN Data Portal | ALL | LINK | --- |
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 106 KB |
Declaration of Conformity | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2711B | ALL | 39 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6633 | ALL | 219 KB |
Device Description Files/Drivers | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
GSD file for OPC PROFINET device / GSD-Datei für OPC PROFINET-Gerät | 2015-04 | ZIP | 11 KB |
Software Tools | |||
Integration example as function block / Integrationsbeispiel als Funktionsbaustein | 2015-04 | ZIP | 1074 KB |
Software Vision Configurator / Software Vision Configurator | V6.7.0 | ZIP | 65423 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|