Active infrared scanner DoorScan-OS-1P-1200
- Moving presence sensor for automatic doors
- SIL 2, certified in accordance with DIN 18650/EN 16005
- Exceptional detection reliability
- Reliable operation with all floor coverings
- Complete protection up to the wall without sensor shutoff
- Additional protection of the main and secondary closing edges
- Tool-free module mounting using snap-in mechanism
- Switchable NPN or PNP outputs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot DoorScan-OS-1P-1200
| Tuotekuvaus |
|---|
| Light curtain for individual protection for automatic doors in accordance with DIN 18650/EN 16005, complete system for a door measuring up to 1200 mm wide, NPN output |
| General specifications | ||
|---|---|---|
| Detection range min. | 0 ... 1500 mm | |
| Detection range max. | 0 ... 3500 mm (Upright CA test body) | |
| Sensing range | 1000 mm at installation height of 2100 mm | |
| Light source | IRED 850 nm | |
| Black-white difference (6 %/90 %) | < 2 % at 2000 mm sensor range | |
| Number of beams | 10 | |
| Operating mode | Background evaluation | |
| Diameter of the light spot | 8 cm at 2000 mm sensor range | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Performance level (PL) | PL d | |
| Category | Cat. 2 | |
| MTTFd | 112.7 a | |
| Mission Time (TM) | 10 a | |
| Indicators/operating means | ||
| Function indicator | Receiver: Red LED: detection, operating reserve, fault code Interface: Red LED: detection, operating reserve, fault code Yellow LED: teach status Green LED: blank status Green LED: DIP switch status |
|
| Control elements | Teach-In key , DIP switch for selection of operating modes | |
| Electrical specifications | ||
| Operating voltage | 24 V DC +/- 20 % | |
| No-load supply current | max. 200 mA | |
| Power consumption | 3.3 W | |
| Input | ||
| Test input | high level ≥ 15 V low level ≤ 2 V | |
| Control input | Standby active at U = 11 V DC at 30 V DC | |
| Output | ||
| Switching type | light-on |
|
| Signal output | switchable NPN or PNP , short-circuit protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Response time | ≤ 52 ms ≤ 200 ms in boost operating mode |
|
| Conformity | ||
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 | |
| Product standard | EN 12978 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) | |
| Mechanical specifications | ||
| Housing length L | 1200 mm | |
| Mounting height | max. 3500 mm | |
| Degree of protection | IP54 (when mounted) | |
| Connection | Plug-in terminal with 6-wire connection cable | |
| Material | ||
| Housing | Aluminum / PA | |
| Optical face | PC (Polycarbonate) | |
| Mass | approx. 1400 g | |
| Dimensions | (W x H x D) : 42 mm x 1200 mm x 37 mm | |
| Height | 42 mm | |
| Depth | 37 mm | |
| Length | 1200 mm | |
| General information | ||
| Scope of delivery | Sensor system for door hinge side or hinge opposite side (1 emitter and receiver module each, 1 interface module, double-ended cordset, 1 sensing strip each, and sensor window, 2 end caps) | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270913 |
| ECLASS 12.0 | 27270913 |
| ECLASS 11.0 | 27270913 |
| ECLASS 10.0.1 | 27270913 |
| ECLASS 9.0 | 27270913 |
| ECLASS 8.0 | 27270913 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC002550 |
| ETIM 8.0 | EC002550 |
| ETIM 7.0 | EC002550 |
| ETIM 6.0 | EC002550 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details: DoorScan-OS-1P-1200
Function
DoorScan is a presence sensor for automatic revolving doors. It uses active infrared technology to perform background evaluation. The sensor is suitable for mobile or stationary mounting. Because the emitter and receiver module can be repositioned freely, the field of view can also be adjusted to fit the door width. An interface controls both sides of the door and establishes the link to the door controller. DoorScan meets the requirements of DIN 18650 and is a safety system fulfilling PL d in accordance with DIN EN ISO 13849-1 used in conjunction with a secure door controller that generates and evaluates the test signals.
Product Documentation: DoorScan-OS-1P-1200
| Manuals | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Manual | ENG | 2756 KB |
Design / Simulation: DoorScan-OS-1P-1200
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 2137 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: DoorScan-OS-1P-1200
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| EU TUV Nord EC-Type Exam. Certificate Functional Safety | 44 205 13 095719 | ALL | 89 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0115F | ALL | 480 KB | |
Liitännäistuotteet: DoorScan-OS-1P-1200
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.
The largest portfolio of its kind: K-System components and systems are established in process industries around the world. Learn more!
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.