Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

RFID read/write device IUT-F190-B40-2V1D-FR2-02

IUT-F190-B40-2V1D-FR2-02
  • Compact, high-performance UHF RFID read/write device for medium detection ranges
  • Rugged housing for harsh industrial environments
  • Switchable antenna polarization and multi-tag reading
  • Clearly visible LED status indicator
  • Integrated 2-port switch enables line or ring topology
  • Simple operation and configuration via integrated web server
  • OPC UA Server and AutoID Companion Specification enable standardized communication
  • Easy integration into IT systems via REST API

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  IUT-F190-B40-2V1D-FR2-02

Tuotekuvaus
UHF RFID read/write device, USA, Canada and Mexico
General specifications
Operating frequency902 MHz … 928 MHz: USA, Canada, Mexico
Other countries available on request
Emitted power3 … 1250 mW EIRP adjustable
UL File NumberE468231
MTBF55 a (Operation at +40 °C)
Indicators/operating means
LED greenPower on
LED yellowRead/write operation successful
LED blueTransmission mode
LED Link/Trafficgreen: network connection
yellow: flashes in rhythm with the transmitted data
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 500 mA
Power consumption≤ 10 W
Surge protectioncategory 2
Interface 1
Physical Ethernet
ProtocolHTTP (REST API)
OPC UA (AutoID Companion Specification)
EtherNet/IP
PROFINET IO
Transfer rate10 MBit/s or 100 MBit/s
Interface 2
Physical Ethernet
ProtocolHTTP (REST API)
OPC UA (AutoID Companion Specification)
EtherNet/IP
PROFINET IO
Transfer rate10 MBit/s or 100 MBit/s
Standard conformity
Degree of protectionEN 60529
RFIDISO/IEC 18000-63
Approvals and certificates
FCC approvalThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
IC approvalThis device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
IFT approval
CertificatePEPEIU23-25034
Radio approvalUSA: Contains FCC IREIURF190
Canada: Contains 7037A-IURF190
Ambient conditions
ClassificationEnvironmental condition A (controlled environment)
Ambient temperature-20 ... 70 °C (-4 ... 158 °F) (Operation with nontransmission periods, adjustable)
-20 ... 50 °C (-4 ... 122 °F) (Continuous transmission mode)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Pollution degree2
Mechanical specifications
Degree of protectionIP67
ConnectionPower supply: M12 connector
Protective earth: M4 earthing screw
Ethernet: M12 plug connection
Material
HousingPA 6.6
Basediecast aluminum
Mass820 g
Dimensions
Height63 mm
Width112 mm
Length114 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IUT-F190-B40-2V1D-FR2-02

Function

The compact read/write device IUT-F190-B40-2VD1-* operates in the UHF frequency range and is optimized for industrial use over medium distances. The device writes and reads passive transponders according to EPC Gen2 (ISO/IEC 18000-63). The read/write device complies with the respective local radio regulations.

Extensive possibilities for data filtering are supported. The read/write device has an ethernet interface and is connected via an M12 connector. The user can monitor the status of the read/write device using the integrated LEDs.

The read/write device has a typical detection range of about 2 m, which is determined by the transponder used and can be adjusted by setting the transmission power. Further influencing factors are the mounting or installation for the specific application and the surrounding materials, especially metal. The separately specified read and write distances for the respective transponders have been determined in a test laboratory under ideal conditions. For the actual read and write distances under real conditions, the combination read/write device and transponder must be tested in the desired application.

Informative Literature: IUT-F190-B40-2V1D-FR2-02

Language Selection:
LiteratureKieliTiedostotyyppiTiedoston koko
Product Information - RFID UHF-F190 PortfolioENGPDF856 KB
Application Report - Clear Identification of Green Tires During VulcanizationENGPDF320 KB
Application Report - Fully Automatic Component Tracking for Prefabricated Home ProductionENGPDF205 KB
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Safe Positioning for Working PlatformsENGPDF279 KB

Product Documentation: IUT-F190-B40-2V1D-FR2-02

Language Selection:
Brief InstructionsKieliTiedostotyyppiTiedoston koko
Instruction leaflet / BeipackzettelALLPDF89 KB
Manuals
Manual IUT-F190-B40-2V1D-*ENGPDF10841 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Design / Simulation: IUT-F190-B40-2V1D-FR2-02

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP4300 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IUT-F190-B40-2V1D-FR2-02

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
Canada Radio Approval7037A-IURF190ALLPDF1239 KB
Canada, USA ULCoC 2021-12-14-E468231ALLPDF509 KB
Mexico CertificateNYC-2302CT0666-01AALLPDF655 KB
Mexico Radio ApprovalPEPEIU23-25034ALLPDF265 KB
ODVA Ethernet/IP12148.01ALLPDF126 KB
USA FCC ApprovalIREIURF190ALLPDF118 KB
Declaration of Conformity
FCC Suppliers Declaration of Conformity / FCC-Konformitätserklärung des LieferantenDOC-5270ALLPDF280 KB

Software: IUT-F190-B40-2V1D-FR2-02

Language Selection:
Device Description Files/DriversJulkaisutiedotTiedostotyyppiTiedoston koko
EDS / EDS2023-12ZIP17 KB
GSD / GSD2024-04ZIP125 KB
Function block TIA Portal (S7-1200/1500) for the RFID station IUT-F190-B40-2V1D (Profinet) when using the Expert Mode. / Funktionsbaustein TIA Portal (S7-1200/1500) für die RFID-Station IUT-F190-B40-2V1D (Profinet) bei der Verwendung des Expert Modes.V1.0ZIP16587 KB
Function blocks TIA Portal (S7-1200/1500) for the RFID station IUT-F190-B40-2V1D (Profinet) when using the Easy Mode. / Funktionsbausteine TIA Portal (S7-1200/1500) für die RFID-Station IUT-F190-B40-2V1D (Profinet) bei der Verwendung des Easy Modes.V1.1ZIP14269 KB
Function blocks TIA Portal (S7-300/400) for the RFID station IUT-F190-B40-2V1D (Profinet) when using the Easy Mode. / Funktionsbausteine TIA Portal (S7-300/400) für die RFID-Station IUT-F190-B40-2V1D (Profinet) bei der Verwendung des Easy ModesV1.1ZIP14824 KB
Function blocks TIA Portal (S7-300/400) for the RFID station IUT-F190-B40-2V1D (Profinet) when using the Expert Mode. / Funktionsbausteine TIA Portal (S7-300/400) für die RFID-Station IUT-F190-B40-2V1D (Profinet) bei der Verwendung des Expert ModesV1.0ZIP10059 KB
OpenAPI Specification / OpenAPI-SpezifikationLINK---
Firmware
Firmware / FirmwareV2.1.2ZIP1975 KB
Software Tools
Add-On instructions for Rockwell Automation Studio 5000 software. For parameterization and read/write functionality on IUT-...-B40, IUT-...IO and IQT3-...-IO Readers / Software Tool_a2.0 Dec 19, 2023ZIP227840 KB

Liitännäistuotteet: IUT-F190-B40-2V1D-FR2-02

Accessories
RFID Transponderfa
RFID Transponderfa
RFID Transponderfa
RFID Transponderfa
Tag for standard applicationsfa
Tag for paint shop applicationsfa
Tag for autoclave applicationsfa
Mounting bracket for wall mountingfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable grey, shieldedfa
Female cordset single-ended M12 straight A-coded, 5-pin, PUR cable black, shielded, UL approved, drag chain suitablefa
Ethernet bus cable M12 plug straight D-coded to RJ45 Ethernet-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa
RFID Read/Write Device IUT-F190-B40 with Industrial Ethernet Interface and REST API

Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …

Visit the RFID Hub

Visit our "RFID Hub"—this special website is a knowledge base for RFID. Get answers on frequently asked questions and learn about typical RFID applications …