Thru-beam sensor (pair) OBE10M-18GF60-SA0-3M-IR
- Sensing range 10 m
- With increased sealing, degree of protection IP68
- Integrated circuit
- Narrow opening angle, suitable for mounting in pairs
- Not sensitive to ambient light
- DC voltage version
- Test input
- Reverse polarity protection
- Short-circuit protected
- Switching status indicator, yellow LED
- Fixed cable
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot OBE10M-18GF60-SA0-3M-IR
| Tuotekuvaus |
|---|
| Thru-beam sensor, M18 threaded housing design, plastic housing, 10 m detection range, infrared light, light/dark on, DC version, 2 NPN outputs, fixed cable |
| System components | ||
|---|---|---|
| Emitter | OBE10M-18GF60-S-3M-IR | |
| Receiver | OBE10M-18GF60-A0-3M-IR | |
| General specifications | ||
| Effective detection range | 0 ... 10 m | |
| Threshold detection range | 12 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Diameter of the light spot | approx. 1500 mm at a distance of 10 m | |
| Opening angle | Emitter: +/- 5 ° ; Receiver: +/- 10 ° | |
| Optical face | frontal | |
| Ambient light limit | 10000 Lux | |
| Accessories provided | Mounting nuts | |
| Functional safety related parameters | ||
| MTTFd | 606 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | Emitter: LED green: Power on | |
| Function indicator | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 17 mA Receiver: ≤ 13 mA |
|
| Protection class | Class III | |
| Input | ||
| Test input | emitter deactivation at 0 V | |
| Output | ||
| Switching type | dark-on and light-on | |
| Signal output | 2 NPN complementary, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 80 Hz | |
| Response time | 6 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| UKCA conformity | UKCA | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP67 / IP68 | |
| Connection | fixed cable Receiver: grey ; Emitter: black | |
| Material | ||
| Housing | PC , black | |
| Optical face | Plastic pane | |
| Cable | ||
| Length | 3 m | |
| Mass | approx. 120 g per device | |
| Dimensions | ||
| Length | 59 mm | |
| Diameter | 18 mm | |
| Thread size | M18 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: OBE10M-18GF60-SA0-3M-IR
Function
The optical sensor is optimized to perform in wet environments and in poor visibility conditions. To penetrate mist more effectively, the sensor uses multiple-beam infrared light.
With the full sealing, the sensor operates reliably in wet environments and over a wide temperature range.
Approvals: OBE10M-18GF60-SA0-3M-IR
| Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-US-L87056-11-41301991-3 / UL-CA-L87056-31-41301991-3 | ALL | 1806 KB | |
| Declaration of Conformity | ||||
| EU-vaatimustenmukaisuusvakuutus | TDOC-6980AFIN | FIN | 217 KB | |
| EU-vaatimustenmukaisuusvakuutus | TDOC-6980BFIN | FIN | 218 KB | |
| UK-Declaration of conformity / UK-Konformitätserklärung | DOC-6981 | ALL | 222 KB | |
| UK-Declaration of conformity | TDOC-6981AENG | ENG | 195 KB | |
| UK-Declaration of conformity | TDOC-6981BENG | ENG | 195 KB | |
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.