Thru-beam sensor ML29-P/59/102/143-Y807709
- Miniature design
- Ideal for installation in door profiles or frames
- Dark-On switching
- Supplied with connection cable
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot ML29-P/59/102/143-Y807709
| Tuotekuvaus |
|---|
| Thru-beam sensor |
| General specifications | ||
|---|---|---|
| Effective detection range | 0 ... 1.5 m | |
| Threshold detection range | 2.5 m | |
| Light source | IRED | |
| Light type | modulated infrared light , 880 nm | |
| Opening angle | emitter +/- 3 ° | |
| Optical face | lateral | |
| Ambient light limit | 40000 Lux | |
| Indicators/operating means | ||
| Function indicator | LED red in receiver : lights up when receiving the light beam | |
| Electrical specifications | ||
| Operating voltage | 11 ... 30 V DC | |
| No-load supply current | Emitter: ≤ 20 mA Receiver: ≤ 10 mA |
|
| Input | ||
| Test input | emitter deactivation at +UB ≤ 5 V DC | |
| Output | ||
| Switching type | dark-on | |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 0.1 A | |
| Switching frequency | 100 Hz | |
| Response time | 5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 61000-6-2, EN 61000-6-3 | |
| Approvals and certificates | ||
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -20 ... 75 °C (-4 ... 167 °F) | |
| Relative humidity | 90 % , noncondensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin plastic connector, 6.5 mm diameter | |
| Material | ||
| Housing | PMMA , black | |
| Optical face | Plastic pane | |
| Mass | per device 120 g | |
| Dimensions | ||
| Height | 85.2 mm | |
| Width | 11.6 mm | |
| Depth | 9.2 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details: ML29-P/59/102/143-Y807709
Function
The narrow miniature thru-beam sensors are a small and cost-effective solution, fitting in virtually any door frame. The ML29 and ML30 series offer fast, reliable detection at a distance of up to 8.5 m. The sensors are easy to mount on the profile, either using adhesive strips or a screw. A large opening angle ensures problem-free alignment. Several sensors can be mounted in a cross formation to offer multi-beam protection.
Informative Literature: ML29-P/59/102/143-Y807709
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: ML29-P/59/102/143-Y807709
| Brief Instructions | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 141 KB |
Design / Simulation: ML29-P/59/102/143-Y807709
| CAD | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| 3-D model emitter / 3-D-Modell Sender | ALL | STP | 73 KB |
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 73 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: ML29-P/59/102/143-Y807709
| Declaration of Conformity | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-2230D | ALL | 229 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-6934 | ALL | 225 KB |
Liitännäistuotteet: ML29-P/59/102/143-Y807709
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
Whether glass, solar wafers or printed circuit boards: The photoelectric sensors of the ML100 series are precisely tailored to meet the requirements of various complex detection tasks. Learn more about the portfolio and find the ideal sensor for your application ...
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.