Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
OBE6000-12GM40-SE4-V1
| Tuotekuvaus |
| Thru-beam sensor, M12 threaded housing design, metal housing, front optical face, 6 m detection range, red light, light/dark on, 1 NPN output, M12 plug |
| System components |
| Emitter | OBE6000-12GM40-V1 |
| Receiver | OBE6000-12GM40-E4-V1 |
| General specifications |
| Effective detection range | 0 ... 6000 mm |
| Threshold detection range | 8500 mm |
| Adjustment range | 500 ... 8500 mm |
| Reference target | receiver |
| Light source | LED |
| Light type | red , 640 nm |
| Angle deviation | +/- 2 ° |
| Diameter of the light spot | approx. 800 mm at a distance of 6 m Red light |
| Opening angle | approx. 4 |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 ; 20000 Lux |
| Functional safety related parameters |
| MTTFd | 806 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green: Power on |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted |
| Control elements | sensitivity adjustment , receiver |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , class 2 |
| Ripple | 10 % |
| No-load supply current | ≤ 30 mA (emitter and receiver) |
| Input |
| Control input | light on +UB
dark on: 0 V |
| Output |
| Switching type | light/dark on electrically switchable |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2 V |
| Switching frequency | ≤ 1000 Hz |
| Response time | 0.5 ms |
| Conformity |
| Product standard | EN 60947-5-2 |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | UL 508 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE, cULus Listed 57M3 (Only in association with UL Class 2 power supply; Type 1 enclosure) |
| Ambient conditions |
| Ambient temperature | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Material | |
| Housing | brass, nickel-plated |
| Optical face | PMMA |
| Mass | approx. 15 g (device) |
| Dimensions | |
| Length | 55 mm |
| Diameter | 12 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270901 |
| ECLASS 12.0 | 27270901 |
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 9.0 | EC002716 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Details:
OBE6000-12GM40-SE4-V1
Product Documentation:
OBE6000-12GM40-SE4-V1
Design / Simulation:
OBE6000-12GM40-SE4-V1
Approvals:
OBE6000-12GM40-SE4-V1
Liitännäistuotteet:
OBE6000-12GM40-SE4-V1
| Accessories |
|
|
|
| Mounting flange, 12 mmfa |
|
|
|
|
| Plastic mounting adapter, 12 mmfa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
+358 20 7861 290