Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Tuotekuvaus |
---|
G5 Ex module 4 inputs/2 valve outputs |
General specifications | ||
---|---|---|
Node type | Standard node | |
EC-Type Examination Certificate | DMT 02 ATEX E 125 | |
Group, category, type of protection | II (1GD) 2G Ex e mb [ia] IIB/IIC T4 Intrinsically safe input and output circuits can be laid in the 1G and 1D category areas. |
|
Indicators/operating means | ||
LED PWR/CHK | dual LED green/red green: AS-Interface voltage red flashing: communication error or address 0 or SC/LK error |
|
LED IN | 4 dual LED yellow/red yellow: switching state (input) red flashing: SC/LK error |
|
LED OUT | Switching state (output); 2 LED yellow | |
Electrical specifications | ||
Rated operating voltage | 26.5 ... 31.6 V PELV from AS-Interface | |
Rated operating current | ≤ 90 mA | |
Maximum safe voltage | 40 V | |
Short-circuit current | ≤ 35 A | |
Input | ||
Number/Type | 4 inputs according to IEC 60947-5-6 (NAMUR, DIN 19234) | |
Switching point | OFF ≤ 1.2 mA ON ≥ 2.1 mA |
|
Values in accordance with EC-Type Examination Certificate | Extract; Other values for mixed and parallel circuits (2:1 mode): see EC-Type Examination Certificate | |
Voltage | ≤ 8.8 V DC | |
Current | ≤ 11.5 mA | |
Power | ≤ 25.3 mW | |
Internal resistor | ≥ 765 Ω | |
Internal capacitance | negligible | |
Internal inductance | negligible | |
Type of protection | ||
External capacitance | ||
External inductance | ||
L/R-ratio | ||
Characteristic curve | linear | |
Output | ||
Number/Type | 2 outputs for control of intrinsically safe valves | |
Values in accordance with EC-Type Examination Certificate | ||
Voltage | ≤ 28 V DC | |
Current | ≤ 110 mA | |
Power | ≤ 770 mW | |
Internal resistor | ≥ 258 Ω | |
Type of protection | ||
External capacitance | ||
External inductance | ||
L/R-ratio | ||
Characteristic curve | linear | |
Nominal values | (typically) | |
Open loop voltage | 26 V | |
Short-circuit current | 50 mA | |
Internal resistor | 270 Ω | |
Curve angle points (nominal values) | 12.5 V DC, 50 mA | |
Standard conformity | ||
Degree of protection | EN 60529:2000 | |
AS-Interface | EN 62026-2:2013 | |
Programming instructions | ||
Profile | S-7.F | |
IO code | 7 | |
ID code | F | |
Data bits (function via AS-Interface) | ||
D0 | ||
D1 | ||
D2 | ||
D3 | ||
Parameter bits (programmable via AS-i) | function | |
P0/P1 | (Output conditions on failure of the AS-Interface communication or LB/LK error) 0/0 outputs unchanged 0/1 outputs not controllable 1/0 outputs controllable 1/1 outputs not controllable |
|
P2 | not used | |
P3 | not used | |
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -20 ... 85 °C (-4 ... 185 °F) | |
Mechanical specifications | ||
Degree of protection | IP54 according to EN 60529 | |
Connection | screw terminals | |
Mass | 1.5 kg | |
Mounting | screw mounting | |
Tightening torque | Terminal compartment cover = 1.5 Nm |
System | Classcode |
---|---|
ECLASS 13.0 | 27242604 |
ECLASS 12.0 | 27242604 |
ECLASS 11.0 | 27242604 |
ECLASS 10.0.1 | 27242604 |
ECLASS 9.0 | 27242604 |
ECLASS 8.0 | 27242604 |
ECLASS 5.1 | 27242604 |
ETIM 9.0 | EC001599 |
ETIM 8.0 | EC001599 |
ETIM 7.0 | EC001599 |
ETIM 6.0 | EC001599 |
ETIM 5.0 | EC001599 |
UNSPSC 12.1 | 39121535 |
Safety and Security Documentation | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|
Käyttöohje | FIN | 120 KB |
Certificates | Sertifikaatin nro | Kieli | Tiedostotyyppi | Tiedoston koko |
---|---|---|---|---|
AS-Interface | 48001 | ALL | 94 KB | |
Europe DMT ATEX Category (1) 2 | DMT 02 ATEX E 125 | ALL | 2158 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|