Serviceline Industrial Sensors
Serviceline Explosion Protection
Inductive positioning system PMI120-F90-C2EP-IO-V15-3G-3D
- Parameterization and diagnosis via IO-Link
- Measuring range 0 ... 120 mm
- Parameterisable measuring range
- Analog current or voltage output, programmable
- 2 Push-pull outputs
- Switch points programmable via IO-Link
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of PMI120-F90-C2EP-IO-V15-3G-3D
| General specifications | ||
|---|---|---|
| Switching element function | Analog current or voltage output, programmable 2 switch outputs, programmable |
|
| Object distance | 0.5 ... 3 mm , recommended: 1.5 mm | |
| Measuring range | 0 ... 120 mm | |
| Linearity range | 1 ... 119 mm | |
| Nominal ratings | ||
| Operating voltage | 12 ... 30 V DC (13 ... 30 V when analog voltage output is parameterized) |
|
| Reverse polarity protection | reverse polarity protected | |
| Linearity error | within measuring range: ± 0.8 mm within linearity range: ± 0.4 mm |
|
| Repeat accuracy | ± 0.1 mm | |
| Resolution | 50 µm | |
| Temperature drift | ± 0.5 mm (-25 °C ... 70 °C) | |
| No-load supply current | ≤ 40 mA | |
| Operating voltage indicator | LED green | |
| Functional safety related parameters | ||
| MTTFd | 278 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED S1 | switching state Switching output 1 | |
| LED S2 | switching state Switching output 2 | |
| LED S3 | Damping element in the configured analog measuring range | |
| LED STATUS | Status display LED, green/red (Power on, communication/error, missing damping element) | |
| Interface | ||
| Interface type | IO-Link (via C/Q = Pin 4) | |
| IO-Link revision | 1.1 | |
| Device profile | Smart Sensor | |
| Device ID | 0x200404 (2098180) | |
| Transfer rate | COM2 (38.4 kBit/s) | |
| Value range | 0000h ... 9600h | |
| Min. cycle time | 2.3 ms | |
| Process data width | Process data input: 16 Bit Process data output: none |
|
| SIO mode support | yes | |
| Compatible master port type | A | |
| Switching output | ||
| Output type | 2 push-pull outputs (can be parameterized), short-circuit-proof, reverse polarity protection, surge-proof | |
| Operating current | ≤ 100 mA / Output | |
| Switching window | ± 1 mm | |
| Switching hysteresis | 0.2 mm | |
| Voltage drop | ≤ 3 V | |
| Short-circuit protection | pulsing | |
| Analog output | ||
| Output type | 1 current output: 4 ... 20 mA or 1 voltage output: 0 ... 10 V , programmable | |
| Load resistor | current output: ≤ 400 Ω voltage output: ≥ 1000 Ω |
|
| Short-circuit protection | voltage output: current limit | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 EN 60947-5-7:2003 EN61131-9:2013 IEC 60947-5-7:2003 IEC 61131-9:2013 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications | ||
| Connection type | 5-pin, M12 x 1 connector | |
| Degree of protection | IP67 / IP69K | |
| Material | ||
| Housing | PBT, stainless steel 1.4571 , brass, nickel-plated | |
| Target | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) | |
| Mass | 113 g | |
| Dimensions | ||
| Height | 40 mm | |
| Width | 23 mm | |
| Length | 135.2 mm | |
| Data for application in connection with hazardous areas | ||
| Equipment protection level | Gc (nA) , Dc | |
| Equipment protection level Gc (nA) | ||
| Type of protection | "n" | |
| CE marking | [*PD-Z02586A*] | |
| Certificates | ||
| ATEX certificate | PF 15 CERT 3754 X | |
| ATEX marking |  II 3G Ex nA IIC T6 Gc |
|
| Standards | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 |
|
| Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output voltage UAmax , maximum analog output current IAmax | |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. mode of operation 1 at UBmax = 30 V and maximum 2 switching outputs with each ILmax =100 mA and 1 analog output with IAmax = 20mA or UAmax = 10 V : 35 °C (95 °F) mode of operation 2 at UBmax = 30 V and maximum 1 switching output with ILmax =100 mA : 50 °C (122 °F) |
|
| Equipment protection level Dc | ||
| Type of protection | Protection by enclosure "tc" | |
| CE marking | [*PD-Z02586A*] | |
| Certificates | ||
| ATEX certificate | PF 15 CERT 3774 X | |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc |
|
| Standards | EN 60079-0:2012/A11+2013 , EN 60079-31:2014 | |
| Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output voltage UAmax , maximum analog output current IAmax | |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. mode of operation 1 at UBmax = 30 V and maximum 2 switching outputs with each ILmax =100 mA and 1 analog output with IAmax = 20mA or UAmax = 10 V : 35 °C (95 °F) mode of operation 2 at UBmax = 30 V and maximum 1 switching output with ILmax =100 mA : 50 °C (122 °F) |
|
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274004 |
| ECLASS 12.0 | 27274004 |
| ECLASS 11.0 | 27270702 |
| ECLASS 10.0.1 | 27270702 |
| ECLASS 9.0 | 27270702 |
| ECLASS 8.0 | 27270702 |
| ECLASS 5.1 | 27270702 |
| ETIM 9.0 | EC001852 |
| ETIM 8.0 | EC001852 |
| ETIM 7.0 | EC001852 |
| ETIM 6.0 | EC001852 |
| ETIM 5.0 | EC001852 |
| UNSPSC 12.1 | 39121550 |
Details: PMI120-F90-C2EP-IO-V15-3G-3D
Product Documentation: PMI120-F90-C2EP-IO-V15-3G-3D
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Installation and Design Notes for Position Sensors, F90 Series | ENG | 311 KB | |
| Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 169 KB | |
Approvals: PMI120-F90-C2EP-IO-V15-3G-3D
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | UL-CA-2133562-0 / UL-US-2140037-0 | ALL | 546 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 D Certificate | PF15CERT3774X | ALL | 1001 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G Certificate | PF15CERT3754X | ALL | 1015 KB |
Software: PMI120-F90-C2EP-IO-V15-3G-3D
| Software Tools | Release Info | File Type | File Size |
|---|---|---|---|
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.006 / 2022-07-10 | ZIP | 96138 KB |
Associated Products: PMI120-F90-C2EP-IO-V15-3G-3D
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.