Distance sensor VDM18-100/20/122/151
- Analog output 4 mA ... 20 mA
- High resolution
- Very fast response characteristic, suitable for rapid scanning process
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
De complete datasheet als PDF downloaden:
Technische gegevens VDM18-100/20/122/151
| Productbeschrijving |
|---|
| Universal distance sensor, measurement to object, 100 mm detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, M12 plug |
| General specifications | ||
|---|---|---|
| Measuring range | 30 ... 100 mm | |
| Light source | laser diode typ. service life 50,000 h at Ta = +40 °C |
|
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 2 | |
| Wave length | 650 nm | |
| Light spot representation | approx. 1.5 mm x 3 mm at 100 mm | |
| Measuring method | Laser triangulation | |
| Ambient light limit | ≤ 5000 Lux | |
| Nominal ratings | ||
| Linearity error | 0.25 % of the measuring range | |
| Repeat accuracy | < 0.25 % of the measured value | |
| Resolution | < 0.1 % of the measuring range | |
| Temperature drift | < 0.02 % / °C | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 yellow LEDs: Switching status (each output) , 4 green LEDs: Operating mode | |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
| Parameterization indicator | LED red | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| No-load supply current | ≤ 40 mA at 24 V DC | |
| Protection class | II , rated voltage ≤ 50 V DC | |
| Time delay before availability | ≤ 300 ms | |
| Output | ||
| Signal output | 2 PNP outputs, independent | |
| Switching current | max. 100 mA | |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
| Switching frequency | ≤ 1 kHz | |
| Response time | 0.4 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Laser class | DIN EN 60825-1:2008, IEC 60825-1:2007 | |
| Approvals and certificates | ||
| UL approval | cULus Listed | |
| Approvals | CE, cULus | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 60 °C (14 ... 140 °F) | |
| Storage temperature | -20 ... 80 °C (-4 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | M12 connector, 8-pin | |
| Material | ||
| Housing | ABS , impact resistant | |
| Optical face | PMMA | |
| Mass | approx. 43 g | |
| Dimensions | ||
| Height | 50 mm | |
| Width | 17 mm | |
| Depth | 50 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM18-100/20/122/151
Product Documentation: VDM18-100/20/122/151
| Manuals | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| Manual VDM18/151 | ENG | 1008 KB |
Design / Simulation: VDM18-100/20/122/151
| CAD | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 248 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: VDM18-100/20/122/151
| Certificates | Certificaatnummer | Taal | Bestandstype | Bestandsgrootte |
|---|---|---|---|---|
| Canada USA UL Ordinary Location | E87056 | ALL | LINK | --- |
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Aanverwante producten: VDM18-100/20/122/151
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Ontdek de SmartRunner-laserprofielsensoren met een unieke combinatie van lichtsectietechnologie en een 2D-vision sensor met ingebouwde LED’s …
De R2000 biedt betrouwbare en uiterst nauwkeurige meetresultaten, met een aaneensluitend 360° zicht rondom...
Meten in 3D of op hoge snelheid: De R2300-serie biedt de geschikte LiDAR-sensor voor elke uitdaging. Meer informatie over de voordelen, de technologie en de toepassingsmogelijkheden...
Voor het eerst is er een consistente reeks sensoroplossingen beschikbaar die optische functieprincipes en innovatieve technologieën in identieke behuizingen verenigt. Gebruikers genieten van een uniform bedieningsconcept voor het volledige portfolio. Ontdek de R100-, R101-, R103-, R200- en R201-series...
De afstandssensoren met geavanceerde technologieën bieden de hoogste mate van nauwkeurigheid en betrouwbaarheid ...
Pepperl+Fuchs B.V.
Pettelaarpark 104
5216 PR 's-Hertogenbosch
Nederland
sales@nl.pepperl-fuchs.com
+31 73 75 07 107
sales-pa@nl.pepperl-fuchs.com
+31 73 75 07 108
Pepperl+Fuchs is een toonaangevend ontwikkelaar en producent van elektronische sensoren en componenten voor de wereldwijde automatiseringsmarkt. Continue innovatie, hoge kwaliteit en gestage groei zijn de basis van ons succes, al meer dan 70 jaar. Pepperl+Fuchs heeft wereldwijd 6300 medewerkers en productiefaciliteiten in Duitsland, de Verenigde Staten, Singapore, Hongarije, Indonesië en Vietnam, waarvan het merendeel ISO 9001 gecertificeerd.