Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Description produit |
---|
6000 Series Type X and Ex pxb purge and pressurization system control unit |
General specifications | ||
---|---|---|
Operating mode | manual, semi-automatic, or fully automatic - programmable | |
Series | 6000 Series | |
Number of volume exchanges | 4 to 19 | |
Hazardous environment | gas, dust, gas and dust | |
Supply | ||
Rated voltage | 90 ... 264 V AC, 48 ... 62 Hz / 0.2 A 20 ... 30 V DC |
|
Electrical specifications | ||
Connection | Terminal blocks | |
Input | ||
Input I | Inputs 1, 2, 3, 4: contact input, 5 VDC @ 2 mA | |
Input type | intrinsically safe | |
Input II | Temperature inputs | |
Input type | intrinsically safe | |
Sensor type | 6000-TEMP | |
Input III | EPV-6000 Vent | |
Input type | intrinsically safe | |
Input IV | User interface module | |
Connection | M8 connector, 4-pin | |
Input type | intrinsically safe | |
Output | ||
Output I | AUX 1 | |
Output type | Dry contacts, SPDT | |
Inrush current | 5 A | |
Contact loading | 2 A @ 240 VAC resistive load 2 A @ 24 VDC |
|
Output II | AUX 2 | |
Output type | Dry contacts, SPDT | |
Inrush current | 5 A | |
Contact loading | 2 A @ 240 VAC resistive load 2 A @ 24 VDC |
|
Output III | ENC_1, ENC_2 (protected enclosure contacts) | |
Output type | Dry contacts (2) SPST, NO | |
Contact loading | 8 A @ 240 VAC / 120 VAC resistive load 8 A @ 24 VDC |
|
Indicators/settings | ||
LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - 6000 series system fault |
|
Pneumatic parameters | ||
Protective gas supply | instrument grade air or inert gas | |
Pressure requirement | 20 ... 120 psig (1.4 ... 8.3 bar) (138 ... 827 kPa) regulated | |
Safe pressure | Gas: 0.25" wc (6.4 mm wc) (0.625 mbar) (62 Pa) Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) (162 Pa) Gas and Dust: 0.65" wc (16.5 mm wc) (1.6 mbar) ( 162 Pa) |
|
Purge flow rate | Maximum flow rate measurement for enclosure size (enclosure volume:flow rate): < 20 ft3 (0.57 m3): 5, 12 SCFM (141, 340 l/min), or dynamic 20 ... 30 ft3 (0.57 ... 0.85 m3): 5, 12, 20 SCFM (141, 340, 565 l/min), or dynamic > 30 ft3 (0.85 m3): 5, 12, 20, 30 SCFM (141, 340, 565, 850 l/min), or dynamic |
|
Purge flow and enclosure pressure rate | With EPV-6000-xx-01, EPV-6000-xx-02 5 SCFM @ 1.5" wc, (141 l/min @ 3.7 mbar) 12 SCFM @ 2.0" wc, (340 l/min @ 5.0 mbar) 20 SCFM @ 2.7" wc, (565 l/min @ 6.7 mbar) 30 SCFM @ 4.1" wc, (850 l/min @ 10.2 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 5 SCFM @ 2.1" wc, (141 l/min @ 5.2 mbar) 12 SCFM @ 2.6" wc, (340 l/min @ 6.5 mbar) 20 SCFM @ 4.1" wc, (565 l/min @ 10.2 mbar) 30 SCFM @ 5.3" wc, (850 l/min @ 13.2 mbar) With EPV-6000-xx-05, 06 5 SCFM @ 1.8" wc, (141 l/min @ 4.5 mbar) 12 SCFM @ 2.9" wc, (340 l/min @ 7.3 mbar) 20 SCFM @ 7.4" wc, (565 l/min @ 18.5 mbar) |
|
Flow rate for leakage compensation | Depends on enclosure seal. With EPV-6000-xx-01, EPV-6000-xx-02 0.35 SCFM @ 0.25" wc (10.0 l/min @ 6.3 mbar) 1.0 SCFM @ 0.75" wc (28.0 l/min @ 1.9 mbar) With EPV-6000-xx-03, EPV-6000-xx-04 0.22 SCFM @ 0.25" wc (6.2 l/min @ 6.3 mbar) 0.58 SCFM @ 0.75" wc (16.4 l/min @ 1.9 mbar) With EPV-6000-xx-05, EPV-6000-xx-06 0.15 SCFM @ 0.25" wc (4.2 l/min @ 6.3 mbar) 0.35 SCFM @ 0.75" wc (10.0 l/min @ 1.9 mbar) |
|
Ambient conditions | ||
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Storage temperature | -30 ... 80 °C (-22 ... 176 °F) | |
Relative humidity | 5 ... 95 %, noncondensing | |
Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes | |
Impact resistance | 30 g, 11 ms, all axes | |
Mechanical specifications | ||
Connection type | Pneumatic : Inlet fitting to manifold: 3/8" NPT (female) Outlet fitting from manifold: 3/8" bulkhead fitting (provided) |
|
Cable gland | 4 - M16 x 1.5 cable gland | |
Degree of protection | Type 4X , IP66 | |
Material | Enclosure: 316L (UNS S31603) stainless steel Manifold valve: anodized 6082 aluminum Fittings: 316L (UNS S31603) stainless steel |
|
Mass | -WH- 11.4 kg (25 lb) -CK- 7.2 kg (16 lb) |
|
Dimensions | 183 x 367.5 x 152.5 mm (7.20 x 14.45 x 6.00 inch) | |
Height | 367.5 mm | |
Width | 183 mm | |
Depth | 152.5 mm | |
Data for application in connection with hazardous areas | ||
EU-type examination certificate | ||
Marking | 6000 main control unit with housing 6000-xx-S2-UN-xx-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex ib tb [ib Db] [pxb Db] IIIC T60°C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 main control unit kit version 6000-xx-S2-UN-CK-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) II 2 D Ex tb [ib Db] [pxb Db] IIIC T80°C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: ATEX UL/Demko 07 ATEX 0705753X II 2 G Ex ib [pxb Gb] IIC T4 Gb |
|
Directive conformity | ||
Directive 2014/34/EU | IEC/EN 60079-0 IEC/EN 60079-1 IEC/EN 60079-2 IEC/EN 60079-11 IEC/EN 60079-31 |
|
Directive 94/9/EC | ||
International approvals | ||
UL approval | 6000 Main control unit with housing 6000-xx-S2-UN-xx-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 50 °C) Class I, Zone 1, Group IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Zone 21, Group IIIC T60 °C (-20 °C ≤ Ta ≤ 50 °C) [Ex i] Associated Equipment Ex db ib [ib Gb] [pxb Gb] IIC T4 (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T4 (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: cULus Class I, Division 1, Groups A,B,C,D T4 (-20 °C ≤ Ta ≤ 60 °C) Class II, Division 1, Groups E,F,G T4 (-20 °C ≤ Ta ≤ 60 °C) Class I, Zone 1, Group IIC T4 Class II, Zone 21, Group IIIC T60 °C [Ex i] Associated Equipment Ex db [ib Gb] [pxb Gb] IIC T4 X (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T4 X (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: cULus (-20 °C ≤ Ta ≤ 60 °C) Class I, Division 1, Groups A,B,C,D T4 Class I, Zone 1, Group IIC T4 Ex i Intrinsically safe |
|
IECEx approval | 6000 Main Control unit with housing 6000-xx-S2-UN-xx-xx: IECEx UL 08.0003X Ex db ib [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex ib tb [ib Db] [pxb Db] IIIC T60 °C Db (-20 °C ≤ Ta ≤ 50 °C) 6000 Main control unit kit version 6000-xx-S2-UN-CK-xx: IECEx UL 08.0003X Ex db [ib Gb] [pxb Gb] IIC T4 Gb (-20 °C ≤ Ta ≤ 60 °C) Ex tb [ib Db] [pxb Db] IIIC T80 °C Db (-20 °C ≤ Ta ≤ 60 °C) User interface 6000-UIC-xx: IECEx UL 08.0003X Ex ib [pxb Gb] IIC T4 Gb |
|
General information | ||
Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
System | Classcode |
---|---|
ECLASS 13.0 | 27180508 |
ECLASS 12.0 | 27180508 |
ECLASS 11.0 | 27180508 |
ECLASS 10.0.1 | 27180508 |
ECLASS 9.0 | 27180508 |
ECLASS 8.0 | 27180508 |
ECLASS 5.1 | 40050501 |
ETIM 9.0 | EC000243 |
ETIM 8.0 | EC000243 |
ETIM 7.0 | EC000243 |
ETIM 6.0 | EC000243 |
ETIM 5.0 | EC000243 |
UNSPSC 12.1 | 39121301 |
We are sorry, there are no documents for your language selection. Please select another language. |
Product information | Langue | Type de fichier | Taille |
---|---|---|---|
Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
Brief Instructions | |||
Programming Tree 6000 Series Purge/Pressurization System | ENG | 1157 KB | |
Programming Worksheet 6000 Series Purge/Pressurization System | ENG | 1399 KB | |
Safety and Security Documentation | |||
Manuel d'instructions | FRA | 173 KB | |
Manuals | |||
Installation and Operation Manual 6000 Series Purge/Pressurization System (USA English) | ENG | 13802 KB |
CAD | Langue | Type de fichier | Taille |
---|---|---|---|
2D / DXF Files for 6000 Series component kit / CAD 2-D | ALL | ZIP | 1162 KB |
CAD and STP drawings of 6000 Series complete unit / CAD 2-D | ALL | ZIP | 6729 KB |
Certificates | Identification | Langue | Type de fichier | Taille |
---|---|---|---|---|
ATEX Certificate | DEMKO 07 ATEX 0705753X | ALL | 360 KB | |
Brasil TUV Rheinland Brazil | TÜV 22.1421X | ALL | 1291 KB | |
China SITIIAS CCC Ex Certificate | 2020322304003056 (Katy, TX USA) | ALL | 5433 KB | |
IECEx Certificate of Conformity | IECEx UL 08.0003X | ALL | LINK | --- |
Korea KOSHA | 14-AV4BO-0083 | ALL | 322 KB | |
PESO (India) CCOE | A/P/HQ/MH/104/4757 (P383926) | ALL | 103 KB | |
UL Hazardous Location | E184741 (RFPW, RFPW7 , RFPZ7) | ALL | 741 KB | |
Control Drawings | ||||
Control drawing UL / Control drawing UL | ALL | 711 KB | ||
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B066D | ALL | 162 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|