HART MUX Secondary Module KFD0-HMS-16

16-channel
No external power required
HART field device input (revision 5 to 7)
Used with HART MUX primary module KFD2-HMM-16
Up to SIL 3 acc. to IEC/EN 61508

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Software
Produits associés

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

Caractéristiques techniques KFD0-HMS-16

Description produit
HART MUX Secondary Module

Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Supply
Connection		via 14-channel flat cable from the KFD2-HMM-16 primary module
HART signal channels (non-intrinsically safe)
Conformity		HART field device input (revision 5 to 7)
Connection		26-pin flat cable for analog connections 14-pin flat cable for primary module/secondary module connection between KFD2-HMM-16 and KFD0-HMS-16
Leakage current		< 3 µA at -20 ... 85 °C (-4 ... 185 °F)
Terminating resistor		external 230 ... 500 Ω standard (up to 1000 Ω possible)
Output voltage		≥ 400 mV _ss (with the terminator resistance specified above)
Output resistance		100 Ω or smaller, capacitive coupling
Input impedance		according to HART specification
Input voltage range		0.08 ... 4 V _ss ; typ. ± 5.2 V as local reference
Indicators/settings
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Degree of protection		IEC 60529:2001
Ambient conditions
Ambient temperature		-20 ... 65 °C (-4 ... 149 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		20 x 93 x 115 mm (0.8 x 3.7 x 4.5 inch) (W x H x D) , housing type B1
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate		PF 07 CERT 1143 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210190
ECLASS 12.0	27210190
ECLASS 11.0	27210190
ECLASS 10.0.1	27210190
ECLASS 9.0	27210190
ECLASS 8.0	27210190
ECLASS 5.1	27242692
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001597
UNSPSC 12.1	39121008

Details: KFD0-HMS-16

Informative Literature: KFD0-HMS-16

Literature	Langue	Type de fichier	Taille
Application Report - Biological Cleaning of Wastwater and Secondary Sedimentation Stage	ENG	PDF	566 KB
Application Report - Generating Electricity in Coal-Fired Power Plants	ENG	PDF	412 KB
Application Report - Sand Trap and Preliminary Sedimentation Stage	ENG	PDF	448 KB
Application Report - Screening Systems in Sewage Treatment Plants	ENG	PDF	577 KB

Product Documentation: KFD0-HMS-16

Safety and Security Documentation	Langue	Type de fichier	Taille
Manuel d'instructions	FRA	PDF	88 KB
Manuals
Manual KFD-HM-16	ENG	PDF	8323 KB

Design / Simulation: KFD0-HMS-16

CAD	Langue	Type de fichier	Taille
CAD 3-D / CAD 3-D	ALL	STP	105 KB
CAD Portal / CAD Portal	ALL	LINK	---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data Portal	ALL	LINK	---
EPLAN macro EDZ / EPLAN Makro EDZ	ALL	EDZ	60 KB

Approvals: KFD0-HMS-16

Certificates	Identification	Langue	Type de fichier	Taille
Europe Pepperl+Fuchs Certificate of Compliance ATEX Category 3	PF 07 CERT 1143 X	ALL	PDF	209 KB
exida Functional Safety Assessment	P+F 02/4-11 R006	ALL	PDF	348 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0777D	ALL	PDF	1040 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)	DOC-5294A	ALL	PDF	1037 KB

Software: KFD0-HMS-16

Device Description Files/Drivers	Parution	Type de fichier	Taille
DTM Collection HART-Multiplexer / DTM Collection HART-Multiplexer	2.0.1.208	ZIP	13306 KB
Software Tools
PACTware 4.1 SP6 / PACTware 4.1 SP6	4.1.0.53	ZIP	43327 KB
PACTware 5.0 / PACTware 5.0	5.0.5.31	ZIP	44203 KB

Produits associés : KFD0-HMS-16

Matching System Components

	FI-PFH-TR-AI-370X-GP HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, TAN48 approval, HART Termination Board (ETP) for Tricon v10 AI module, For 16-channel AI cards 3700, 3700A, 3703E and 3721, 16-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

	FI-PFH-TR-AO-380X HART Termination Board
	System board for Schneider Electric, Tricon series by Triconex, HART Termination Board (ETP) for Tricon AO module, For 8-channel AO card 3805E, 8-channel, Field side: pluggable screw terminals, green, Control side: ELCO socket, 56-pinpa

	FI-PFH-NS0137-R HART Termination Board
	Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminalspa

Matching System Components

	K-HM26 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

	DTM Generic HART Universal DTM
	Device DTM, For HART multiplexers, Communication DTMpa

	DTM HART Comm Commmunication drivers
	Communication DTM, Frame application, like e. g. PACTware, must be installed separatelypa

	DTM HART Multiplexer Device Type Manager (DTM)
	Human machine interface, For HiDMux2700, For KFD2-HMM-16/KFD0-HMS-16pa

	K-HM14 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KFD2-HMM-16 to up to 15 KFD0-HMS-16, 14-pin ribbon cablepa

	K-HM26-114025 HART Connection Cable with Connectors
	K-System accessory, Connection cable for KF-HM-16 to Termination Board, 26-pin ribbon cablepa

	KFD2-HMM-16 HART MUX Primary Module
	16-channel, 24 V DC supply (Power Rail), HART field device input (revision 5 to 7), Up to 15 KFD0-HMS-16 HART MUX secondary modules can be connected, Up to SIL 3 acc. to IEC/EN 61508pa

Remarques générales sur les informations produit de Pepperl+Fuchs

Accès direct

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Centre de sécurité fonctionnelle de Pepperl+Fuchs

Visitez le Centre de sécurité fonctionnelle

Plusieurs centaines de produits ayant fait l'objet d'une évaluation SIL/PL, des outils gratuits et des brochures au même endroit : le « Centre de sécurité fonctionnelle » est votre point de départ lorsque vous devez mettre en œuvre des fonctions de sécurité.

Pepperl+Fuchs North Africa
Abraj Abdelmoumen B2
Boulevard Abdelmoumen
20340 Casablanca
Morocco
ventes.afrique@de.pepperl-fuchs.com
phone +212 (0) 522 25 97 90

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.