Motor Starters Ex d IIB F7-DOL*
- Various power ratings available
- Coil voltage 415V
- Ex d and Ex tD certified
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Gas group IIB
- Aluminum enclosure
- Suitable for Ex d motors
- Degree of protection IP66
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques F7-DOL*
| Electrical specifications | ||
|---|---|---|
| Operating voltage | 415 V | |
| Operating current | see PDF data sheet | |
| Terminal capacity | ||
| Main terminals capacity | 4 mm2 | |
| Main terminals torque | 1.7 Nm | |
| Grounding terminals capacity | M6 grounding bolt | |
| Contactor rating | see PDF data sheet | |
| Overload relay | see PDF data sheet | |
| Phases | 3 | |
| Function | direct online starter | |
| Switching diagram | see switching diagram overview | |
| Mechanical specifications | ||
| Thread type | metric ISO pitch 1.5 mm | |
| Enclosure range | F7 | |
| Enclosure cover | detachable , hinged | |
| Cover fixing | stainless steel socket cap head screws | |
| Screws | M6 | |
| Number | 8 | |
| Tightening torque | 3 Nm | |
| Material of screws | stainless steel | |
| Yield stress | min. 450 N/mm2 | |
| Cover seal | chloroprene | |
| Flamepath grease | Fluid film grade AR | |
| Degree of protection | IP66 | |
| Cable entry face A | ||
| M20 quantity | 2 | |
| M20 type | Stopping Plugs | |
| Cable entry face B | ||
| M20 quantity | 2 | |
| Material | ||
| Enclosure | aluminum alloy | |
| Finish | epoxy coated RAL 7032 | |
| Mass | approx. 5 kg | |
| Dimensions | ||
| External dimension (A) | 210 mm | |
| External dimension (B) | 210 mm | |
| External dimension (C) | 158 mm | |
| External dimension with operating element (C1) | 199 mm | |
| Mounting holes distance (G) | 187 mm | |
| Mounting holes distance (H) | 187 mm | |
| Mounting holes diameter (J) | 9 mm | |
| Tightening torque | ||
| Nut torque at enclosure (SW1) | see datasheets of stopping plugs | |
| Mounting | see PDF data sheet | |
| Grounding | M6 external grounding points | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | SIRA 07 ATEX 1134 | |
| Marking |  II 2 GD Ex d IIB T* Ex tD A21 T6/T80 °C @ Ta +60 °C |
|
| Maximum power dissipation | 31 W | |
| International approvals | ||
| IECEx approval | IECEx TSA 07.0029 | |
| Conformity | ||
| Degree of protection | EN60529 | |
| Usage category | IEC / EN 60947 | |
| CE marking | 0102 | |
| General information | ||
| Ordering information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. | |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27144052 |
| ECLASS 12.0 | 27144052 |
| ECLASS 11.0 | 27144052 |
| ECLASS 10.0.1 | 27144052 |
| ECLASS 9.0 | 27144052 |
| ECLASS 8.0 | 27144052 |
| ECLASS 5.1 | 27370401 |
| ETIM 9.0 | EC000522 |
| ETIM 8.0 | EC000522 |
| ETIM 7.0 | EC000522 |
| ETIM 6.0 | EC000522 |
| ETIM 5.0 | EC000522 |
| UNSPSC 12.1 | 39121314 |
Details: F7-DOL*
Approvals: F7-DOL*
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Australia Sira II 2GD ATEX | SIRA 07ATEX1134 | ALL | 235 KB | |
| Test Safe IECEx Certificate of Conformity | IECEx TSA 07.0029 | ALL | LINK | --- |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-A036D | ALL | 160 KB | |
Pepperl+Fuchs North Africa
Abraj Abdelmoumen B2
Boulevard Abdelmoumen
20340 Casablanca
Morocco
ventes.afrique@de.pepperl-fuchs.com
+212 (0) 522 25 97 90
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.