Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Caractéristiques techniques
IQT1-FP-R4-V1
| Description produit |
| HF RFID read/write device, ISO 15693 |
| General specifications |
| Operating frequency | 13.56 MHz |
| Transfer rate | 26 kBit/s |
| Sensing range | |
| Read distance | 0 ... 130 mm |
| Write distance | 0 ... 130 mm |
| Width | max. 100 mm |
| UL File Number | E87056 |
| MTBF | 110 a (Operation at +40 °C) |
| Indicators/operating means |
| LED green/yellow | green: power on
green flashing: read/write attempt performed
yellow: data carrier detected |
| Electrical specifications |
| Rated operating voltage | 10 ... 30 V DC , ripple 10 %SS , limited power source (EN 60950) |
| Power consumption | ≤ 1.3 W |
| Interface |
| Physical | RS-485 point-to-point connection |
| Protocol | ASCII |
| Transfer rate | 1200, 2400, 4800, 9600, 19200, 38400 (default) Bit/s |
| Cable length | ≤ 3 m |
| Directive conformity |
| Radio equipment | |
| Directive 2014/53/EU | EN 301489-1
EN 301489-3
EN 300330
EN 62368-1
EN 50364 |
| RoHS | |
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 |
| Standard conformity |
| Degree of protection | EN 60529 |
| RFID | ISO/IEC 15693-2
ISO/IEC 15693-3
ISO/IEC 18000-3 |
| Approvals and certificates |
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
| NCC approval | CCAM18LP0480T9 |
| Radio approval | USA: FCC IREIQH1-FP-V1 |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | connector M12 x 1 |
| Material | |
| Housing | PBT |
| Base | diecast aluminum |
| Encapsulation compound | CY 221/HY 2966 |
| Installation | |
| Distance between two heads | ≥ 150 mm
|
| Mass | approx. 380 g |
| Dimensions | |
| Height | 40 mm |
| Width | 80 mm |
| Length | 108.5 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details:
IQT1-FP-R4-V1
Product Documentation:
IQT1-FP-R4-V1
Design / Simulation:
IQT1-FP-R4-V1
Produits associés :
IQT1-FP-R4-V1
| Accessories |
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
|
| Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
|
| Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
|
|
|
| Data carrierfa |
|
+212 (0) 522 25 97 90