Radar sensor RaDec-D-NA
- Microwave motion sensor with intelligent functions
- Reliable detection of people and vehicles
- Simplest adjustement of the sensing range
- Wall and ceiling mountable
- Version with direction detection and cross-traffic suppression
- Version with FCC-frequency
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques RaDec-D-NA
| Description produit |
|---|
| FCC-approved standard radar motion sensor offering additional functions, dynamic version offering direction detection, 2 m x 4.5 m detection range, max. installation height: 4 m, black housing, relay contact output, cable connection |
| General specifications | ||
|---|---|---|
| Sensing range | Wide: 2000 x 4500 mm (DxW) at 2200 mm mounting height and 30° inclination angle narrow: 4500x 2000 mm (DxW) at 2200 mm mounting height and 30° inclination angle |
|
| Function principle | Microwave module | |
| Detection speed | min. 0.1 m/s | |
| Setting angle | 0 ... 90 ° in 5 ° increments | |
| Operating frequency | 24.075 ... 24.175 GHz K-Band | |
| Operating mode | Radar motion sensor | |
| Transmitter radiated power (EIRP) | < 20 dBm | |
| Functional safety related parameters | ||
| MTTFd | 300 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Function indicator | LED red | |
| Control elements | potentiometer , DIP switch for selection of operating modes | |
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 12 ... 36 V DC , 12 ... 28 V AC | |
| No-load supply current | ≤ 50 mA at 24 V DC | |
| Power consumption | ≤ 1.7 W | |
| Output | ||
| Switching type | NO/NC | |
| Signal output | Relay, 1 NO contact/NC contact | |
| Switching voltage | max. 48 V AC / 48 V DC | |
| Switching current | max. 0.5 A AC / 1 A DC | |
| Switching power | max. 24 W / 60 VA | |
| De-energized delay | 1 s | |
| Approvals and certificates | ||
| FCC approval | FCC Rules part 15 / This device can be used in the USA. | |
| IC approval | RSS210 Issue 8.0 / This device can be used in Canada. | |
| Approvals | Use in countries within the European Union is not permitted. In other countries, all applicable national regulations must be observed. | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | max. 90 % non-condensing | |
| Mechanical specifications | ||
| Mounting height | max. 4000 mm | |
| Degree of protection | IP54 | |
| Connection | Connecting cable 2.5 m included with delivery | |
| Material | ||
| Housing | PC/ABS black | |
| Mass | 130 g | |
| Dimensions | 101 mm x 60 mm x 59 mm | |
| Height | 60 mm | |
| Width | 101 mm | |
| Depth | 59 mm | |
| Suitable series | ||
| Series | RaDec | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274501 |
| ECLASS 12.0 | 27280890 |
| ECLASS 11.0 | 27280890 |
| ECLASS 10.0.1 | 27280890 |
| ECLASS 9.0 | 27280890 |
| ECLASS 8.0 | 27280890 |
| ECLASS 5.1 | 27270990 |
| ETIM 9.0 | EC004807 |
| ETIM 8.0 | EC000138 |
| ETIM 7.0 | EC000138 |
| ETIM 6.0 | EC000138 |
| ETIM 5.0 | EC000138 |
| UNSPSC 12.1 | 39121528 |
Details: RaDec-D-NA
Fonction
Les détecteurs radar de mouvements de la série RaDec, compacts et stylisés, répondent aux principales exigences des fabricants de portes et permettent une installation et une utilisation faciles. Le microprocesseur intégré avec technologie à micro-ondes 24 GHz garantit une fiabilité optimale, même dans des conditions difficiles. En outre, le détecteur propose deux zones de détection réglables, différents modes de fonctionnement, une hauteur d'installation de 4 m, ainsi qu'une gamme de température de fonctionnement comprise entre -20 °C et +60 °C. La version -D peut également détecter le sens de rotation et être raccordée à un système d'occultation de la circulation transversale.
Informative Literature: RaDec-D-NA
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: RaDec-D-NA
| Brief Instructions | Langue | Type de fichier | Taille |
|---|---|---|---|
| Brief Instructions - RaDec-D | FRA | 344 KB |
Design / Simulation: RaDec-D-NA
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 785 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Produits associés : RaDec-D-NA
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.