RFID read/write device IQT3-FP-IO-V1
- Range up to 30 cm
- Operating frequency 13.56 MHz
- Conforms to ISO 15693
- LEDs as function indicators
- Multi-tag reading of up to 20 tags ensures increased productivity
- For connection to IO-Link master
- Degree of protection IP67
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques IQT3-FP-IO-V1
| Description produit |
|---|
| HF RFID read/write device with IO-Link in accordance with ISO 15693 |
| General specifications | ||
|---|---|---|
| Operating frequency | 13.56 MHz | |
| Transfer rate | 26 kBit/s | |
| Sensing range | ||
| Read distance | 0 ... 300 mm (see manual) | |
| Write distance | 0 ... 300 mm (see manual) | |
| Width | max. 300 mm | |
| MTBF | 90 a (Operation at +40 °C) | |
| Indicators/operating means | ||
| LED green | Solid green: Ready for operation, no IO-Link communication Flashing green (1 Hz): IO-Link operation |
|
| LED yellow | Read/write operation successful | |
| LED red | status display | |
| LED blue | Transmission mode | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC (IO-Link) | |
| Current consumption | max. 700 mA ( NOTE: Check the power supply capabilities at the port of the master and wire gauge of the connection cable in order to assure stable communication. ) | |
| Interface | ||
| Interface type | IO-Link | |
| IO-Link revision | 1.1 | |
| Device profile | Identification and Diagnosis - I&D | |
| Process data | Input 32 Byte Output 32 Byte |
|
| Vendor ID | 1 (0x0001) | |
| Device ID | 4195073 (0x400301) | |
| Data transfer rate | COM3 (230.4 kbits/s) | |
| Min. cycle time | 4 ms | |
| SIO mode support | no | |
| Compatible master port type | Class A Class B |
|
| Directive conformity | ||
| Radio equipment | ||
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
|
| Approvals and certificates | ||
| UL approval | E468231 cULus Listed, Class 2 Power Source, Type 1 enclosure |
|
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| MIC approval | AC-24025 | |
| ACMA approval | CERT-7286 | |
| WPC approval | ETA-SD-20230908020 | |
| Radio approval | USA: Contains FCC ID IREIQR3FP Canada: Contains IC 7037A-IQR3FP |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) (Operation with nontransmission periods, adjustable) -25 ... 55 °C (-13 ... 131 °F) (Continuous transmission mode) |
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | PA 6.6 | |
| Encapsulation compound | WEVO 403FL/300 | |
| Installation | ||
| Distance between two heads | ≥ 750 mm |
|
| Mass | 385 g | |
| Dimensions | ||
| Height | 40 mm | |
| Width | 80 mm | |
| Length | 80 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IQT3-FP-IO-V1
Product Documentation: IQT3-FP-IO-V1
| Manuals | Langue | Type de fichier | Taille |
|---|---|---|---|
| Manual IQT3-FP-IO-V1 | ENG | 4172 KB | |
| Parameter Information | |||
| IO-Link Parameter Datasheet IQT3-FP-IO-V1 / IO-Link-Parameter-Datenblatt IQT3-FP-IO-V1 | ALL | 527 KB | |
Design / Simulation: IQT3-FP-IO-V1
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1062 KB |
Approvals: IQT3-FP-IO-V1
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Canada Radio Approval | 7037A-IQR3FP | ALL | 324 KB | |
| Canada, USA UL | UL-US-2401706-0 | ALL | 285 KB | |
| IO-Link Manufacturer Declaration | CERT-7017 | ALL | 363 KB | |
| India Radio Approval | ETA-SD-20230908020 | ALL | 61 KB | |
| Japan Radio Approval | AC-24025 | ALL | 208 KB | |
| USA FCC Approval | IREIQR3FP | ALL | 342 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-7356 | ALL | 105 KB | |
| Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung | ALL | 61 KB | ||
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7357 | ALL | 103 KB | |
| Australia Declaration of Conformity | ACMA Supplier's declaration of conformity | ALL | 168 KB | |
| FCC Suppliers Declaration of Conformity / FCC-Konformitätserklärung des Lieferanten | DOC-7358 | ALL | 276 KB | |
Software: IQT3-FP-IO-V1
Produits associés : IQT3-FP-IO-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Get to know the new IUT-F190-B40, which is designed for medium detection ranges, and can be quickly and easily integrated into OT and IT systems …
Visitez notre « Hub RFID » : ce site Internet spécial constitue une base de connaissances de la RFID. Obtenez des réponses aux questions fréquemment posées et découvrez les applications RFID types…
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.