RFID read/write device IQH1-F61-V1
- Operating frequency 13.56 MHz
- Conforms to ISO 15693
- Suitable for FRAM transponder
- Particularly flat construction
- Connection cable with V1 plug (M12 x 1)
- Degree of protection IP67
- Can be mounted on metal
- For connection to IDENTControl evaluation unit
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF ::
Caractéristiques techniques IQH1-F61-V1
| Description produit |
|---|
| HF RFID read/write device, ISO 15693, for IDENTControl |
| General specifications | ||
|---|---|---|
| Operating frequency | 13.56 MHz | |
| Transfer rate | 26 kBit/s | |
| Sensing range | ||
| Read distance | 0 ... 55 mm | |
| Write distance | 0 ... 55 mm | |
| Width | max. 45 mm | |
| UL File Number | E87056 | |
| MTBF | 385 a (Operation at +40 °C) | |
| Electrical specifications | ||
| Power consumption | ≤ 1.3 W | |
| Supply | from the IDENTControl | |
| Directive conformity | ||
| Radio equipment | ||
| Directive 2014/53/EU | EN 301489-1 EN 301489-3 EN 300330 EN 62368-1 EN 50364 |
|
| RoHS | ||
| Directive 2011/65/EU (RoHS) | IEC/EN 63000 | |
| Standard conformity | ||
| Degree of protection | EN 60529 | |
| RFID | ISO/IEC 15693-2 ISO/IEC 15693-3 ISO/IEC 18000-3 |
|
| Approvals and certificates | ||
| FCC approval | This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
| IC approval | This device complies with Industry Canada licence-exempt RSS standard(s) and with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. |
|
| KCC approval | KCC-CRI-PF1-IQH1-F61-V1 | |
| MIC approval | AC-14012 | |
| NCC approval | CCAM15LP0270T0 | |
| Radio approval | USA: FCC IREIQH1-F61-V1 Canada: 7037A-IQH1F61V1 |
|
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | connector M12 x 1 | |
| Material | ||
| Housing | ABS | |
| Encapsulation compound | WEVO 403FL/300 | |
| Installation | ||
| Distance between two heads | Multiplex on: ≥ 100 mm Multiplex off: ≥ 150 mm |
|
| Mass | approx. 60 g | |
| Dimensions | ||
| Height | 12 mm | |
| Width | 28 mm | |
| Length | 80 mm | |
| Cable length | 20 cm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27280401 |
| ECLASS 12.0 | 27280401 |
| ECLASS 11.0 | 27280401 |
| ECLASS 10.0.1 | 27280401 |
| ECLASS 9.0 | 27280401 |
| ECLASS 8.0 | 27280401 |
| ECLASS 5.1 | 27280401 |
| ETIM 9.0 | EC002998 |
| ETIM 8.0 | EC002998 |
| ETIM 7.0 | EC002998 |
| ETIM 6.0 | EC002998 |
| ETIM 5.0 | EC002998 |
| UNSPSC 12.1 | 43211710 |
Details: IQH1-F61-V1
Informative Literature: IQH1-F61-V1
| Literature | Langue | Type de fichier | Taille |
|---|---|---|---|
| Application Report - Automatic Recording and Ordering in the Kanban System | ENG | 209 KB | |
| Application Report - Precisely Tailored Identification Solution for Transport Bots | ENG | 213 KB | |
| Application Report - RFID Systems in Industrial Metal Stamping | ENG | 1773 KB |
Product Documentation: IQH1-F61-V1
| Manuals | Langue | Type de fichier | Taille |
|---|---|---|---|
| Manual Read / Write Ranges and Passing Speeds RFID | ENG | 3640 KB |
Design / Simulation: IQH1-F61-V1
| CAD | Langue | Type de fichier | Taille |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 201 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
| CAE | |||
| CAE EPLAN macro EDZ / CAE EPLAN Makro EDZ | ALL | EDZ | 50 KB |
Approvals: IQH1-F61-V1
| Certificates | Identification | Langue | Type de fichier | Taille |
|---|---|---|---|---|
| Canada Radio Approval | 18-112016 | ALL | 580 KB | |
| Canada, USA UL | CoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0 | ALL | 561 KB | |
| Japan Radio Approval | CERT-3127 | ALL | 243 KB | |
| Korea | KCC-CRI-PF1-IQH1-F61-V1 | ALL | 176 KB | |
| Taiwan Radio Approval | CCAM15LP0270T0 | ALL | 132 KB | |
| USA FCC Approval | IREIQH1-F61-V1 | ALL | 64 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-1864C | ALL | 109 KB | |
| Simplified EU Declaration of Conformity / Vereinfachte EU-Konformitätserklärung | ALL | 61 KB | ||
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-7035 | ALL | 107 KB | |
| Australia Radio Approval | CERT-3900 | ALL | 326 KB | |
Produits associés : IQH1-F61-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs AG
Längfeldweg 116
2504 Biel/Bienne
Suisse
info@ch.pepperl-fuchs.com
+41 32 374 76 76
© 2024 Tous droits réservés.
Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.