请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
RLK29-55/25/116-Set
產品描述 |
Robust, compact, long range photoelectric sensors for detecting people, objects and vehicles |
General specifications |
Effective detection range | 0 ... 12 m |
Reflector distance | 0.04 ... 12 m |
Threshold detection range | 14 m |
Reference target | H85-2 reflector |
Light source | LED |
Light type | modulated visible red light , 640 nm |
Diameter of the light spot | approx. 35 mm at a distance of 12 m |
Opening angle | ± 1 ° |
Ambient light limit | 90000 Lux |
Accessories provided | reflector C110-2 , Mounting bracket with mounting materials |
Functional safety related parameters |
MTTFd | 1460 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Function indicator | LED red illuminates: when beam is free flashes: when level falls below function reserve off: when beam is interrupted |
Electrical specifications |
Operating voltage | 24 ... 230 V AC/DC |
Ripple | 10 % |
No-load supply current | ≤ 8.5 mA |
Power consumption | 0.2 W at 24 V DC , 1.8 W at 230 V AC 3 VA |
Output |
Switching type | light-on |
Signal output | Relay, 1 alternator |
Switching voltage | 230 V AC |
Switching current | max. 2 A |
Switching frequency | 7 Hz |
Response time | 50 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
CE conformity | yes |
EAC conformity | TR CU 020/2011 TR CU 004/2011 |
UL approval | cULus Listed Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508. |
CCC approval | Certified by China Compulsory Certification (CCC) |
Ambient conditions |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | terminal compartment |
Material | |
| Housing | Plastic ABS, flame resistant |
| Optical face | Plastic pane |
Mass | approx. 200 g |
Dimensions | |
| Height | 88 mm |
| Width | 25.8 mm |
| Depth | 65.5 mm |
Note | Safety fuse ≤ 2 A (slow-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
RLK29-55/25/116-Set
Product Documentation:
RLK29-55/25/116-Set
Design / Simulation:
RLK29-55/25/116-Set
Approvals:
RLK29-55/25/116-Set
相關產品:
RLK29-55/25/116-Set
Kit component |
|
|
|
Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
Mounting bracket for rear wall mountingfa |
|
|
|
|
Robust, compact photoelectric sensor for single-beam gate protection, Not sensitive to ambient light, even with energy saving lamps, Tamper-proof, no operating controls, Version for universal voltages, Relay output, Light source: LED, Light type: modulated visible red light , 640 nm, Operating voltage: 24 ... 230 V AC/DC, Switching type: light-on, Signal output: Relay, 1 alternatorfa |
|
Accessories |
|
|
|
Mounting bracket fa |
|
|
|
|
Mounting bracket for rear wall mountingfa |
|
|
|
|
Mounting bracket: mounting aid for sensors in the RL* seriesfa |
|