请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
OBR10M-R202-E2-V1-4R-SET
產品描述 |
Retroreflective sensor with polarization filter and angle bracket |
General specifications |
Effective detection range | 0 ... 10 m |
Reflector distance | 0.05 ... 10 m |
Threshold detection range | 12 m |
Reference target | H85-2 reflector |
Light source | LED |
Light type | modulated visible red light |
LED risk group labelling | exempt group |
Polarization filter | yes |
Diameter of the light spot | approx. 300 mm at a distance of 10 m |
Opening angle | 2 ° |
Ambient light limit | EN 60947-5-2 : 60000 Lux |
Functional safety related parameters |
MTTFd | 876 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green: on - power on flashing (4 Hz) - short circuit |
Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve Flashing (8 Hz) - fault detected, the outputs maintain the status |
Control elements | |
Control elements | |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | max. 10 % |
No-load supply current | < 30 mA at 24 V Operating voltage |
Protection class | III |
Output |
Switching type | Q - Pin4: PNP normally open / dark-on |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA , resistive load |
Usage category | DC-12 and DC-13 |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | 1000 Hz |
Response time | 0.5 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -30 ... 60 °C (-22 ... 140 °F)
|
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
Mass | approx. 55 g |
Dimensions | |
| Height | 62 mm |
| Width | 20 mm |
| Depth | 42 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
OBR10M-R202-E2-V1-4R-SET
Approvals:
OBR10M-R202-E2-V1-4R-SET
相關產品:
OBR10M-R202-E2-V1-4R-SET
Kit component |
|
|
|
Mounting aid for sensors and reflectors for mounting on round rod d=12 mm or sheet 1.5 mm ... 3 mm, Mounting bracket, Mounting plate and round rod can each be mounted using a separate screwfa |
|
|
|
|
Retroreflective sensor with polarization filter, Reliable detection of foil wrapped objects, Medium design with versatile mounting options, Degree of protection IP67, Mounting on full metal sockets, Highly visible LEDs for Power ON and switching statefa |
|
Accessories |
|
|
|
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa |
|
|
|
|
Reflector, round ø 84 mm, central mounting holefa |
|
|
|
|
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa |
|
|
|
|
Reflective tape 100 mm x 100 mmfa |
|
|
|
|
Mounting bracket narrowfa |
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|