请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
GLV18-55/115b/120
產品描述 |
Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, light/dark on, DC version, 2 PNP outputs, fixed cable with M12 plug |
General specifications |
Effective detection range | 0 ... 4 m |
Reflector distance | 0.05 ... 4 m |
Threshold detection range | 5.5 m |
Reference target | reflector C110-2 |
Light source | LED |
Light type | modulated visible red light , 640 nm |
Polarization filter | yes |
Diameter of the light spot | approx. 200 mm at 5.5 m |
Opening angle | approx. 2 ° |
Optical face | frontal |
Ambient light limit | 30000 Lux |
Functional safety related parameters |
MTTFd | 920 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, statically lit Power on |
Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | < 20 mA |
Output |
Switching type | light/dark on |
Signal output | 2 PNP, complementary, short-circuit protected, open collectors |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ≤ 1.5 V DC |
Switching frequency | 500 Hz |
Response time | ≤ 1 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
Protection class | II, Rated insulation voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
UL approval | cULus Listed, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | fixed cable 150 mm with M12 x 1 male connector, 4 pin |
Material | |
| Housing | PC |
| Optical face | PMMA |
Mass | approx. 40 g |
Dimensions | |
| Length | 39.8 mm |
| Diameter | 18 mm |
| Thread size | M18 |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
GLV18-55/115b/120
Product Documentation:
GLV18-55/115b/120
Design / Simulation:
GLV18-55/115b/120
Approvals:
GLV18-55/115b/120
相關產品:
GLV18-55/115b/120
Accessories |
|
|
|
Mounting Bracket with swivel nutfa |
|
|
|
|
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
Plastic mounting adapter, 18 mmfa |
|
|
|
|
Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|