请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
OBR2000-R3-E1-L
| 產品描述 |
| Laser retroreflective sensor, ultra-small design with M3 mounting, polarization filter, 2000 mm detection range, NPN output, 2 m fixed cable |
| General specifications |
| Effective detection range | 0 ... 2 m |
| Reflector distance | 40 ... 2000 mm |
| Threshold detection range | 2.3 m |
| Reference target | H40 reflector |
| Light source | laser diode |
| Light type | modulated visible red light , 680 nm |
| Polarization filter | yes |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 1 |
| Wave length | 680 nm |
| Beam divergence | > 5 mrad |
| Pulse length | approx. 3 µs |
| Repetition rate | approx. 16.6 kHz |
| max. pulse energy | 8 nJ |
| Diameter of the light spot | approx. 35 mm at a distance of 2000 mm |
| Opening angle | approx. 0.5 ° |
| Optical face | frontal |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Functional safety related parameters |
| MTTFd | 800 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Operation indicator | LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz) |
| Function indicator | LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted |
| Electrical specifications |
| Operating voltage | 12 ... 24 V |
| No-load supply current | < 10 mA |
| Protection class | III |
| Output |
| Switching type | NC contact / light-on |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage | max. 30 V DC |
| Switching current | max. 50 mA , resistive load |
| Voltage drop | ≤ 1.5 V DC |
| Switching frequency | approx. 2 kHz |
| Response time | 250 µs |
| Conformity |
| Product standard | EN 60947-5-2 |
| Laser safety | EN 60825-1:2007 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| UL approval | E87056 , cULus Recognized, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| FDA approval | IEC 60825-1 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Material | |
| Housing | PC/ABS and TPU |
| Optical face | glass |
| Cable | PUR |
| Mass | approx. 20 g |
| Dimensions | |
| Height | 26 mm |
| Width | 7.5 mm |
| Depth | 13.8 mm |
| Cable length | 2 m |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270902 |
| ECLASS 12.0 | 27270902 |
| ECLASS 11.0 | 27270902 |
| ECLASS 10.0.1 | 27270902 |
| ECLASS 9.0 | 27270902 |
| ECLASS 8.0 | 27270902 |
| ECLASS 5.1 | 27270902 |
| ETIM 9.0 | EC002717 |
| ETIM 8.0 | EC002717 |
| ETIM 7.0 | EC002717 |
| ETIM 6.0 | EC002717 |
| ETIM 5.0 | EC002717 |
| UNSPSC 12.1 | 39121528 |
Details:
OBR2000-R3-E1-L
Product Documentation:
OBR2000-R3-E1-L
Approvals:
OBR2000-R3-E1-L
相關產品:
OBR2000-R3-E1-L
| Accessories |
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Mounting aid for sensors from the R3 series, mounting bracketfa |
|
|
|
|
| Reflector, rectangular 47.5 mm x 23.5 mm, mounting holes, fixing strapfa |
|
|
|
|
| Reflector with mounting holesfa |
|
|
|
|
| Reflector with Micro-structure, rectangular 32 mm x 20 mm, mounting holesfa |
|
|
|
|
| Reflector with Micro-structure, rectangular 23 mm x 13.8 mm, diagonal mounting holefa |
|
+886 2 27227708