请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
NBN8-18GM50-E2-10M
General specifications |
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 8 mm |
Installation | non-flush |
Output polarity | DC |
Assured operating distance | 0 ... 6.48 mm |
Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 24 mm x 24 mm x 1 mm |
Reduction factor rAl | 0.44 |
Reduction factor rCu | 0.42 |
Reduction factor r304 | 0.76 |
Reduction factor rBrass | 0.52 |
Output type | 3-wire |
Nominal ratings |
Operating voltage | 5 ... 36 V |
Switching frequency | 0 ... 1650 Hz |
Hysteresis | typ. 5 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | pulsing |
Voltage drop | ≤ 1 V |
Operating current | 0 ... 200 mA |
Off-state current | max. 20 µA |
No-load supply current | ≤ 10 mA |
Time delay before availability | ≤ 10 ms |
Switching state indicator | LED, yellow |
Functional safety related parameters |
MTTFd | 1708 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Conformity |
PWIS conformity | VDMA 24364-C1/T100°C-W |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates |
Protection class | II |
| Rated insulation voltage | 36 V |
| Rated impulse withstand voltage | 500 V |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Marine approval | DNVGL TAA00003AK |
Ambient conditions |
Ambient temperature | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | cable |
Housing material | brass , white bronze coated |
Sensing face | PBT , green |
Degree of protection | IP65 / IP66 / IP67 / IP68 |
Cable | |
| Wire end ferrules | yes |
| Cable diameter | 4.3 mm ± 0.15 mm |
| Bending radius | > 10 x cable diameter |
| Material | PVC |
| Color | black |
| Number of cores | 3 |
| Core cross section | 0.34 mm2 |
| Length | 10 m |
Mass | 327 g |
Dimensions | |
| Length | 56 mm |
| Diameter | 18 mm |
Mounting | with nuts, M18 |
Tightening torque | 0 ... 30 Nm |
General information |
Scope of delivery | 2 self locking nuts in scope of delivery |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NBN8-18GM50-E2-10M
Product Documentation:
NBN8-18GM50-E2-10M
Design / Simulation:
NBN8-18GM50-E2-10M
Approvals:
NBN8-18GM50-E2-10M
相關產品:
NBN8-18GM50-E2-10M
Accessories |
|
|
|
Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
Plastic mounting adapter, 18 mmfa |
|
|
|
|
Mounting brackets for sensorsfa |
|