请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
NMB6-F104M-E2-NFE-200MM-V1
General specifications |
Switching function | Normally open (NO) |
Output type | PNP |
Rated operating distance | 6 mm |
Installation | flush |
Assured operating distance | 0 ... 4.86 mm |
Actuating element | Nonferrous targets |
Reduction factor rAl | 1 |
Reduction factor rCu | 1.1 |
Reduction factor r304 | 0 |
Reduction factor rSt37 | 0 |
Reduction factor rBrass | 0.9 |
Output type | 3-wire |
Nominal ratings |
Operating voltage | 10 ... 30 V DC |
Switching frequency | 20 Hz |
Hysteresis | 5 ... 15 typ. 10 % |
Reverse polarity protection | reverse polarity protected |
Short-circuit protection | yes |
Voltage drop | ≤ 2 V |
Operating current | ≤ 100 mA |
Current consumption | ≤ 22 mA |
Off-state current | ≤ 10 µA |
Indicators/operating means |
Operation indicator | Dual LED Green: power Yellow: output |
Standard conformity |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates |
UL approval | cULus Listed, General Purpose |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Mechanical specifications |
Connection type | fixed cable with plug |
Housing material | Stainless steel 1.4305 / AISI 303
|
Degree of protection | IP67 |
Connector | |
| Threading | M12 x 1 |
| Tightening torque | 0.6 Nm |
| Number of pins | 3 |
Cable | |
| Cable diameter | 4.3 mm ± 0.1 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Color | black |
| Number of cores | 3 |
| Core cross section | 0.34 mm2 |
| Length | 200 mm |
Dimensions | |
| Height | 8 mm |
| Width | 20 mm |
| Length | 32 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27274001 |
ECLASS 12.0 | 27274001 |
ECLASS 11.0 | 27270101 |
ECLASS 10.0.1 | 27270101 |
ECLASS 9.0 | 27270101 |
ECLASS 8.0 | 27270101 |
ECLASS 5.1 | 27270101 |
ETIM 9.0 | EC002714 |
ETIM 8.0 | EC002714 |
ETIM 7.0 | EC002714 |
ETIM 6.0 | EC002714 |
ETIM 5.0 | EC002714 |
UNSPSC 12.1 | 39121550 |
Details:
NMB6-F104M-E2-NFE-200MM-V1
Product Documentation:
NMB6-F104M-E2-NFE-200MM-V1
We are sorry, there are no documents for your language selection. Please select another language. |
Design / Simulation:
NMB6-F104M-E2-NFE-200MM-V1
Approvals:
NMB6-F104M-E2-NFE-200MM-V1
相關產品:
NMB6-F104M-E2-NFE-200MM-V1
Accessories |
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, POC cable welding-bead resistant orange, suitable for robotic applications, torsion resistant, oil resistant, molecularly cross-linkedfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, POC cable welding-bead resistant orange, suitable for robotic applications, torsion resistant, oil resistant, molecularly cross-linkedfa |
|
|
|
|
torque screwdriver (0.6 Nm)fa |
|
|
|
|
plug-in cap M12fa |
|