请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
UMC3000-30H-E5-5M
General specifications |
Sensing range | 200 ... 3000 mm |
Adjustment range | 240 ... 3000 mm |
Dead band | 0 ... 200 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 100 kHz |
Response delay | ≤ 200 ms |
Indicators/operating means |
LED green | Operating display |
LED yellow | switching state |
LED red | error |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | ≤ 50 mA |
Input/Output |
Input/output type | 1 synchronization connection, bidirectional |
| 0 Level | 0 ... 1 V |
| 1 Level | 4 V ... UB |
| Input impedance | > 12 kΩ |
| Output current | < 12 mA |
| Pulse length | ≥ 200 µs |
| Pulse interval | ≥ 2 ms |
Synchronization frequency | |
| Common mode operation | ≤ 20 Hz |
| Multiplex operation | ≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 ) |
Input |
Input type | 1 program input |
Level (switch point 1) | 0 ... 1 V |
Level (switch point 2) | 4 V ... UB |
Input impedance | > 10 kΩ |
Pulse length | 2 ... 5 s |
Output |
Output type | 1 switching output E5, PNP NO/NC, programmable |
Rated operating current | 200 mA , short-circuit/overload protected |
Voltage drop | ≤ 2 V |
Repeat accuracy | ≤ 0.1 % of full-scale value |
Switching frequency | ≤ 2.8 Hz |
Range hysteresis | programmable , preset to 1 mm |
Temperature influence | < 1.5 % of full-scale value |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | cable PUR , 5 m |
Core cross section | 5 x 0.5 mm2 |
Degree of protection | IP68 / IP69K |
Material | |
| Housing | Stainless steel 1.4404 / AISI 316L LED window: VMQ Elastosil LR 3003/Shore 50 A |
| Transducer | Stainless steel 1.4435 / AISI 316L |
Mass | 425 g |
Dimensions | |
| Length | 100 mm |
| Diameter | 30 mm |
Factory settings |
Output | near switch point: 240 mm far switch point: 3000 mm output function: Window mode output behavior: NO contact |
General information |
Supplementary information | Switch settings of the external programming adapter: "output load": pull-down "output logic": inv |
Classifications
System | Classcode |
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Details:
UMC3000-30H-E5-5M
Product Documentation:
UMC3000-30H-E5-5M
Approvals:
UMC3000-30H-E5-5M
Software:
UMC3000-30H-E5-5M
相關產品:
UMC3000-30H-E5-5M
Accessories |
|
|
|
Programming adapter, USB 2.0 interface, Simple insertion in the sensor connection leadfa |
|
|
|
|
Male cordset, M12, 5-pin, PUR cable with WAGO terminalsfa |
|
|
|
|
Mounting aid, 30 mm, Retainer for 30 mm cylindrical sensors with smooth housing, Installation in 3 ... 12 mm thick sheet metal, Simple installation and exact settingfa |
|