请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
產品規格摘要:的技術資料
UMB800-18H40-E4-2M
General specifications |
Sensing range | 70 ... 800 mm |
Adjustment range | 90 ... 800 mm |
Dead band | 0 ... 70 mm |
Standard target plate | 100 mm x 100 mm |
Transducer frequency | approx. 170 kHz |
Response delay | approx. 100 ms |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | ≤ 15 mA |
Input |
Input type | 1 program input operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
Output |
Output type | 1 switching output E4, NPN, NO/NC, programmable |
Rated operating current | 200 mA , short-circuit/overload protected |
Voltage drop | ≤ 3 V |
Repeat accuracy | ± 0.5 % of full-scale value |
Switching frequency | ≤ 4 Hz |
Range hysteresis | 1 % of the set operating distance |
Temperature influence | ± 1.5 % of full-scale value |
Compliance with standards and directives |
Standard conformity | |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications |
Connection type | cable PUR , 2 m , Polyether based |
Core cross section | 4 x 0.19 mm2 |
Degree of protection | IP68 / IP69K |
Material | |
| Housing | Stainless steel 1.4404 / AISI 316L |
| Transducer | Stainless steel 1.4435 / AISI 316L |
| Seal | Cable seal : TPU , Elastollan 1185 A10 |
Mass | 90 g |
Dimensions | |
| Length | 55 mm |
| Diameter | 18 mm |
Factory settings |
Output | Switch point A1: 90 mm Switch point A2: 800 mm Output mode: Window mode Output logic: normally open |
Classifications
System | Classcode |
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Details:
UMB800-18H40-E4-2M
Product Documentation:
UMB800-18H40-E4-2M
Design / Simulation:
UMB800-18H40-E4-2M
Approvals:
UMB800-18H40-E4-2M
相關產品:
UMB800-18H40-E4-2M
Accessories |
|
|
|
Mounting aid, 18 mm, Retainer for 18 mm cylindrical sensors with smooth housing, Installation in 3 ... 8 mm thick sheet metal, Simple installation and exact settingfa |
|