请注意:所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件,例如证书,合格声明等,同样适用于Pepperl + Fuchs SE。
將完整的規格書下載為PDF:
產品描述 |
---|
Evaluation unit for the ultrasonic sensor system USi-industry with analog and switching outputs (stand-alone device/secondary device) |
General specifications | ||
---|---|---|
Type | USi-industry evaluation unit | |
Sensing range | 10 ... 2500 mm factory setting: 2000 mm |
|
Adjustment range | 150 ... 2500 mm | |
Dead band | 0 ... 10 mm | |
Object size | typ. ∅ 10 mm | |
Transducer frequency | approx. 103 kHz | |
Response delay | 10 ... 20000 ms factory setting: 150 ms |
|
Sensor cycle time | 10 ... 200 ms factory setting: 50 ms |
|
Resolution | 1 mm | |
Target velocity | axial (max.): typ. 2 m/s (up to 2.5 m/s) | |
Repeat accuracy | ± 0.1 % of full-scale value | |
Temperature influence | automatic or manual temperature compensation available , without temperature compensation: 0.17 %/K |
|
Indicators/operating means | ||
LED green | supply voltage/device status | |
LED yellow | output states | |
Button | Teach-in | |
Electrical specifications | ||
Operating voltage | 9 ... 30 V DC |
|
No-load supply current | ≤ 160 mA | |
Power consumption | < 2.5 W | |
Time delay before availability | ≤ 300 ms | |
Interface | ||
Interface type | USB 2.0 | |
Inputs | ||
Input type | 2 inputs for ultrasonic transducers 1 digital input |
|
Output 1 | ||
Designation | OUT 1.1 | |
Output type | 1 analog output 4 ... 20 mA or 1 analog output 0 ... 10 V | |
Deviation of the characteristic curve | ± 1 % of the full-scale value | |
Load resistor | current output: ≤ 500 Ω voltage output: ≥ 1000 Ω |
|
Output 2 | ||
Designation | OUT 1.2 | |
Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
Voltage drop | ≤ 2.5 V | |
Switching frequency | 0.05 Hz ... 100 Hz | |
Off-state current | ≤ 100 µA | |
Switching voltage | max. UB | |
Switching current | 100 mA | |
Output 3 | ||
Designation | OUT 2.1 | |
Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
Voltage drop | ≤ 2.5 V | |
Switching frequency | 0.05 Hz ... 100 Hz | |
Off-state current | ≤ 100 µA | |
Switching voltage | max. UB | |
Switching current | 100 mA | |
Output 4 | ||
Designation | OUT 2.2 | |
Output type | switching output: PNP Normally open/closed (NO/NC) parameterizable |
|
Voltage drop | ≤ 2.5 V | |
Switching frequency | 0.05 Hz ... 100 Hz | |
Off-state current | ≤ 100 µA | |
Switching voltage | max. UB | |
Switching current | 100 mA | |
Compliance with standards and directives | ||
Standard conformity | ||
Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 EN 55011:2016-04 |
|
Approvals and certificates | ||
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector plug | |
Degree of protection | IP65 | |
Connection | for power supply and outputs: connector plug M12, 8-pin, connection line max. 30 m for ultrasonic transducer: for each socket M8, 3-pin for parameterization: socket Mini USB |
|
Material | ||
Housing | diecast aluminum | |
Mass | 250 g | |
Dimensions | ||
Height | 35 mm | |
Width | 77 mm | |
Length | 98 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27272803 |
ECLASS 12.0 | 27272803 |
ECLASS 11.0 | 27272803 |
ECLASS 10.0.1 | 27272803 |
ECLASS 9.0 | 27272803 |
ECLASS 8.0 | 27272803 |
ECLASS 5.1 | 27272803 |
ETIM 9.0 | EC001849 |
ETIM 8.0 | EC001849 |
ETIM 7.0 | EC001849 |
ETIM 6.0 | EC001849 |
ETIM 5.0 | EC001849 |
UNSPSC 12.1 | 41111960 |
Literature | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Product Information - Ultrasonic Sensor Systems USi®-industry and USi®-safety | ENG | 1781 KB | |
Application Report | ENG | 347 KB | |
Application Report | ENG | 333 KB |
Manuals | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
Manual USi-industry USI*-F264-*-V19 | ENG | 2461 KB |
Certificates | 證書號碼 | 語言 | 檔案類型 | 檔案尺寸 |
---|---|---|---|---|
Canada USA UL Ordinary Location | E87056, Vol.1, Sec.65 | ALL | 285 KB | |
Declaration of Conformity | ||||
EU Declaration of Conformity (P+F) / EU-Konformitätserklärung (P+F) | DOC-7654 | ALL | 69 KB | |
UK Declaration of Conformity (P+F) / UK-Konformitätserklärung (P+F) | DOC-7655 | ALL | 67 KB |
Device Description Files/Drivers | 發布資訊 | 檔案類型 | 檔案尺寸 |
---|---|---|---|
DTM for USI*-F264-* / DTM für USI*-F264-* | V1.0.0.3 / 2024-10-08 | ZIP | 22284 KB |
Software Tools | |||
PACTware 6.X / PACTware 6.X | 6.1 | ZIP | 335938 KB |
Matching System Components | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Accessories | ||||||
|
||||||
|
||||||
|