请注意：所有以Pepperl + Fuchs GmbH或Pepperl + Fuchs AG名义发行的产品相关文件，例如证书，合格声明等，同样适用于Pepperl + Fuchs SE。
產品規格摘要：的技術資料
UB300-18GM40-E4-V1
| General specifications |
| Sensing range | 35 ... 300 mm |
| Adjustment range | 50 ... 300 mm |
| Dead band | 0 ... 35 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 390 kHz |
| Response delay | approx. 50 ms |
| Indicators/operating means |
| LED green | Power on |
| LED yellow | indication of the switching state
flashing: program function object detected |
| LED red | solid red: Error
red, flashing: program function, object not detected |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 20 mA |
| Input |
| Input type | 1 program input
operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB
input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Output |
| Output type | 1 switching output E4, NPN, NO/NC, programmable |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Default setting | Switch point A1: 50 mm Switch point A2: 300 mm |
| Voltage drop | ≤ 3 V |
| Repeat accuracy | ≤ 1 % |
| Switching frequency | ≤ 13 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | ± 1.5 % of full-scale value |
| Compliance with standards and directives |
| Standard conformity | |
| Standards | EN IEC 60947-5-2:2020
IEC 60947-5-2:2019 |
| Approvals and certificates |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Degree of protection | IP67 |
| Material | |
| Housing | brass, nickel-plated |
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 25 g |
| Dimensions | |
| Length | 40 mm |
| Diameter | 18 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details:
UB300-18GM40-E4-V1
Product Documentation:
UB300-18GM40-E4-V1
Design / Simulation:
UB300-18GM40-E4-V1
Approvals:
UB300-18GM40-E4-V1
相關產品:
UB300-18GM40-E4-V1
| Accessories |
|
|
|
| Programming unitfa |
|
|
|
|
| Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa |
|
|
|
|
| Mounting flange, 18 mm, Retainer for all cylindrical sensors with M18 thread, Simple installation and exact setting, Large sensing range (max. 20 mm)fa |
|
|
|
|
| Plastic mounting adapter, 18 mmfa |
|
|
|
|
| Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PVC cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Ultrasonic -deflector, Clamp mounting, 90° sound deflection for difficult installation circumstances, Universal Orientationfa |
|
|
|
|
| Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors, For insulated mountingfa |
|
+886 2 27227708